Okay so I finished up the seat tonight. Looks great and more pics coming soon
I also did the fork oil change. Pulled off the forks, drained them, then opened the top, pulled out the spring, filled them with 4.4 fl oz per fork as per the manual...
Once I put everything back together and sat on the bike, it seems like they sag even more now!!!
I felt them by hand while off the bike before and after. They def felt much stiffer, which made me think all was well, but they still sag just as bad once on the bike
Could I have not put enough oil in????
I recall reading somewhere that they filled up with oil until it was about 6 inches from the top. Not sure if that was meant with the forks compressed or not though... I did it with the forks fully expanded and dont think it was close to end at all, but honestly I'm not 100% on where it was since I just went by the actual manuals measure...
Should I put more oil in to help with the sagging? There is no preload adjust on these forks that I know of, so I'm open to suggestions
Pretty annoying that I may need to crack them open again tho... I'll also go for a quick spin in the morning and see how much has improved.
Lots of pics on the way too