For Sale - 1982 xs400RJ Seca for sale or part out

YamahaRider

XS400 Addict
Messages
133
Reaction score
0
Points
16
Location
MAINE
1982 xs400RJ Seca for sale or part out - maine

I am looking to sell my 82 xs400 seca it is running I have been running it for the last 4 summers. I would be willing to part out if I have enough of a response. I would like to get somewhere between 500 & 600 dollars.
 

Attachments

  • image.jpg
    image.jpg
    308.5 KB · Views: 999
Last edited:
I am looking to sell my 82 xs400 seca it is running I have been running it for the last 4 summers. I would be willing to part out if I have enough of a response. I would like to get somewhere between 500 & 600 dollars.

A little bit of history on this bike. I bought it in 2009 it was in very bad condition it sat in my shed for a couple of years. in the spring of 2011 I started prepping the tank and body partd for paint I also did some wiring where the rodents had made themselves to home. The winter before I bought it it sat outside and somebody vandalized it it was missing one carb. and the right hand switch was gone along with the throttle and cable. These are somethings that have been done it another set of carbs. another switch and throttle assy. next I put new bearings on the balance shaft all seals in engine rplaced last spring I replaced the piston rings with a used set of cylindaers because it was really hard to start it starts alot better now.also last spring I put new o-ring chain and new sprockets along with a new rear tire. I will post some before pics maybe later this evening.
 
I thought I would add some before photos of this bike.:bike:
 

Attachments

  • DSCN0290.jpg
    DSCN0290.jpg
    234.3 KB · Views: 783
  • DSCN0292.jpg
    DSCN0292.jpg
    284.7 KB · Views: 758
  • DSCN0298.jpg
    DSCN0298.jpg
    202.9 KB · Views: 776
Hello,

I am interested in the triple tree, front forks and front brake system. What kind of condition are these parts in?

Secondary parts I'd also take if they are working include:
- fuse box/panel
- headlight harness
- horn and harness

I'm located in Santa Monica, CA and would need to ship these parts if you are willing to assist with that.

Thanks,
David
 
Hello,

I am interested in the triple tree, front forks and front brake system. What kind of condition are these parts in?

Secondary parts I'd also take if they are working include:
- fuse box/panel
- headlight harness
- horn and harness

I'm located in Santa Monica, CA and would need to ship these parts if you are willing to assist with that.

Thanks,
David
these parts are all in good working condition there is some pitting on the tubes but it is high enough so it does not interfere with the operation of the forks The fuse box is no longer there I had to wire in some inline fuses. I believe that the headlight harness and the horn harness is part of the main harness. the brakes are in working condition. I rode the bike last summer so everything is pretty much in working condition. Let me know if you are interested and then we can discuss price. I have no problem shipping them to you.
 
Hello,

I am interested in the bottom of the crank case (oil pan, where the drain plug & oil filter are located). I am located in Vancouver BC.

Let me know! Thanks
 
these parts are all in good working condition there is some pitting on the tubes but it is high enough so it does not interfere with the operation of the forks The fuse box is no longer there I had to wire in some inline fuses. I believe that the headlight harness and the horn harness is part of the main harness. the brakes are in working condition. I rode the bike last summer so everything is pretty much in working condition. Let me know if you are interested and then we can discuss price. I have no problem shipping them to you.

Sounds great! I'd be interested in:

1. Front forks and triple tree
2. Front brake system (complete with rotor, brakes, lines, controls, etc.)
3. Gas tank (if in good shape, internally and externally)
4. Main harness, and horn

Pictures would be greatly appreciated, if possible. Let me know what you think and I can provide my email too, if that makes things easier.

Thanks,
David
 
Hello,

I am interested in the bottom of the crank case (oil pan, where the drain plug & oil filter are located). I am located in Vancouver BC.

Let me know! Thanks
I believe that these crankcases are matched so mismatching may cause a problem I am willing to sell you just the bottom half just would not like to see you have a problem let me know if you want it and we can talk about a price.

Thanks Jeff Cavanaugh
 
Sounds great! I'd be interested in:

1. Front forks and triple tree
2. Front brake system (complete with rotor, brakes, lines, controls, etc.)
3. Gas tank (if in good shape, internally and externally)
4. Main harness, and horn

Pictures would be greatly appreciated, if possible. Let me know what you think and I can provide my email too, if that makes things easier.

Thanks,
David
I will try to get you pictures within the next day or so. The inside of the gas tank has been coated it does leak up around the gas cap I think that a new cap might take care of that I have ridden the bike for the past 4 summers with no leaking except around the gas cap. I will take some pictures of the tank so you can get an idea what it looks like.
 
image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg image.jpg
I will try to get you pictures within the next day or so. The inside of the gas tank has been coated it does leak up around the gas cap I think that a new cap might take care of that I have ridden the bike for the past 4 summers with no leaking except around the gas cap. I will take some pictures of the tank so you can get an idea what it looks like.
 
I believe that these crankcases are matched so mismatching may cause a problem I am willing to sell you just the bottom half just would not like to see you have a problem let me know if you want it and we can talk about a price.

Thanks Jeff Cavanaugh

Thanks for the heads up! I will have to look into this and weigh it against my other options.
 
Sounds great! I'd be interested in:

1. Front forks and triple tree
2. Front brake system (complete with rotor, brakes, lines, controls, etc.)
3. Gas tank (if in good shape, internally and externally)
4. Main harness, and horn

Pictures would be greatly appreciated, if possible. Let me know what you think and I can provide my email too, if that makes things easier.

Thanks,
David

If you are still interested could I please get your email.
 
Back
Top