tstidham

And on that same thought for having wet clutch compatible oil, did you soak the new frictions in oil prior to installing them? If not...

How did the steel plates look when you changed the friction disks? The only other thing i can think of is double check the clutch cable...

If it were me, I'd try using a washer, maybe of aluminum or copper/brass, sized so the inner diameter fit the rod with only a little...

Near as I can tell, the yamaha part number is 2a2-14923-00 and partzilla claims to have 2 in stock...

I used a TransPO brand C8313 Heavy Duty Adjustable regulator on mine and it's been working great. Pick up the pigtail for it as well for...

Maybe someone's idea for a hidden kill switch? It doesn't look factory with the tube clamp, corrugated loom cover and zip tie.

When I cleaned my carbs, it took 3 attempts to get everything thing clean. In the end, I took a single strand of some 12 gauge...

Yamaha calls it the clutch cable holder.

Some of the online retailers have a pretty good parts catalog. Helpful for finding the part number then searching ebay...

Nice! That's pretty much what I use mine for and also live in the Philly area, in the NE, near Huntington Valley.

I had similar issues when I rebuilt mine last year. I bled mine while still mounted on the bike but I found tapping the body with a...