Recent content by Omega

  1. O

    2A2/2L0 Pistons

    No matter what pistons you get they'll never way the same as eachother. Could be 0.5 of a gram could be more. If your replacing them yourself try balancing yourself too all youll need is some sand paper, a drill and suitable bits, scales that can measure to 0.1 of a gram and some small weights...
  2. O

    2A2/2L0 Pistons

    The part may have the same numbers just different model numbers, just check if everything else is the same as I've found a 04 yzfr1 has the same conrods bearing but the retainer notch is in a different posistion. Best bet is take your old one and compare it side by side
  3. O

    Would these custom bike parts work

    It's been ages and I've been messin with some ideas for my re-engineered bike. Custom head and cams, valves, piston, the works. I want to see what you guys think and if you have any ideas that'd help 1) Full fairing made from aluminium and acrylic sheet for the visor, about 2mm thin and...
  4. O

    For Sale - Parting out 1983 xs400 clean title

    Hey just wondering if this is still valid do you still have the engine and how much would you be looking for the valve springs
  5. O

    Make Offer - 1982 dohc maxim motor parts for sale

    Hi I'm looking for a full set of valve springs, just wondering hat price you'd be looking for these
  6. O

    For Sale - Bs34 carbs 85% complete for repair or parts

    Crowsnest near toowoomba
  7. O

    Rk café racer build thread. All of your tips, pointers & advice are welcome

    Then salute away my friend. Custom crank shaft is gonna get built and fitted. So far I'm looking at $550 for custom 110° cams, $320 for 2 kz1100 pistons rings and pins, crank cost I don't have yet and neither for the rods. If I can do it I wanna take the 50hp original goal, smash it, grab the...
  8. O

    Rk café racer build thread. All of your tips, pointers & advice are welcome

    Who loves maths? I do!!! Ok so did some more, measured the bore and such to make sure custom barrels will fit. If we got to the upper parts of the cylinders we can see a very flimsy edge on the oil ports, easy fixed, we remove them and increase the top external diameter of the sleeves to 87mm...
  9. O

    For Sale - Bs34 carbs 85% complete for repair or parts

    I'm selling a 85% complete set of bs34 carbs from my bike, I've got my tm34s so I won't need these ones anymore. $50aud ono you pay postage and I'll pack it as small as possible to cut postal fees. They're mostly cpmplete, in good ish condition, no scratches in the slides, diaphragms are in...
  10. O

    Rk café racer build thread. All of your tips, pointers & advice are welcome

    This isn't the adds place but I'm selling a 85% complete set of bs34 carbs from the bike, I've got my tm34s so I won't need these ones anymore. $50aud ono you pay postage and I'll pack it as small as possible to cut postal fees
  11. O

    Rk café racer build thread. All of your tips, pointers & advice are welcome

    I see heaps of bikes and I'm like "I would love that bike". This bikes something to bring me and my dad together, he had a h1 and a 600b, hoping to impress him alot and try n start over. It's gonna be more money then what it's worth to some but if it works and kicks something off id be glad to...
  12. O

    Rk café racer build thread. All of your tips, pointers & advice are welcome

    Yeah I have a good idea for a tank, similar to the tank on this bike, www.returnofthecaferacers.com/2013/02/gull-craft-yamaha-sr400-cafe-racer.html?m=1 but I'll be making it outta 2 layers of carbon 1 layer of carbon kevlar hybrid and 1 of Kevlar on the inside. Seat and tank will be one unit...
  13. O

    Rk café racer build thread. All of your tips, pointers & advice are welcome

    Is that bigger? I tried but photobucket only goes so big
  14. O

    Rk café racer build thread. All of your tips, pointers & advice are welcome

    Ok more math and a picture I had to find the brightest fuel line i could and took some style tips from Drewpy. Starting to get there but won't be finished for a while yet. I found a formula to measure the intake runner for optimum length at a desired rpm range. Ok please follow with me and let...
  15. O

    Wanted - 82 or 83 Oil filter cover

    I have one or I can cast you one in a month or two
Back
Top