1982 XS400R Seca DOHC Carb Boots

fantumtipur4evr

XS400 New Member
Messages
1
Reaction score
0
Points
1
Location
Texas
Hi all,

I am restoring an 82 DOHC and have bad intake boots causing a vacuum leak. I'm having trouble finding any that fit, almost everything online is for the SOHC variant. Anyone have a lead on intake boots for the DOHC model?
 
If you luck out and the stud spread is right, you may be able to use some standard type manifolds like typically used on VM Mikuni carbs but you will not have a way to hook up for syncing carbs.
 
Good luck I was searching for some as I have the same motor in my Maxim.......... I found some over priced ones on ebay and just ended up using what I had as they were good but the looks are not so great............I do have another pair as I have 2 motors..........if your in dire need hit me up I may be able to help........
 
I accidentally cracked one of my boots when I used O rings that were a lil to big. Not all the way through, but I was going to try the heat shrink idea on mine. What I'm finding difficult and I did find some reproduction ones for about $100 a piece or so, are the diaphragm assemblies.
 
Back
Top