Search results

Thanks, Edited!

Correct. I've got two SOHC so they were of no use to me.

Before: 0612181827b by SpikeG posted Jun 19, 2018 at 6:14 PM After: 0821190928 by SpikeG posted Sep 2, 2019 at 3:53 PM 0821190925e by SpikeG posted Sep 2, 2019 at 3:53 PM 0616191633_HDR_2 by SpikeG posted Sep 2, 2019 at 3:53 PM 0619191109d_2 by SpikeG posted Sep 2, 2019 at 3:53 PM...

a year after the start

Sure do. I've got a lot of miscellaneous parts now that my build is finished too. Shoot me a PM if you want them

That's your blinker auto cancel unit, if I'm not mistaken

Are you sure its coming from inside the engine? Does it still make the noise with key off? battery disconnected? if you put your hand on the starter cover, can you feel it vibrating? When you say starter button is missing, is is broken? Could it be grounding out on the bars still?

Sounds like your starter solenoid might be sticking? kinda hard to tell without more info. Your start button grounds through the bars, so if that circuit is grounded then it would be the same as holding your start button.

could be your starter spinning? do you have electric start?

As the title says, looking for header pipes with minimal rust that can be cleaned up well enough. Can be cut shorter as I'll most likely be modifying them anyway! Also looking for the shims that go between the collar and head to seal the pipes. Thanks!

You'll have to get the bushings and sprocket bolts out which I believe requires destroying them. A few people here have done it successfully though. I tried searching but couldn't find the thread. It pops up often though, I'm sure someone knows where it is!

I always remove the petcock when putting anything other than fuel in to be safe. That said, 'ON' will be off as long as the bike isn't running. It needs the vacuum from the engine to open. 'PRIME' however will let the fuel flow openly.

just realized this has mismatched wheels also haha

there are relays you can get for cheaper that plug directly in with no modifications e.g. https://www.aliexpress.com/item/High-Quality-Electronic-LED-Turn-Signals-Flasher-Blinker-Relay-12V-2-Pin-Motorcycle-Relay/32793039303.html?spm=a2g0s.9042311.0.0.7fc74c4dkLmnKW

I was shipped the wrong parts when I rebuilt my engine and I recently found them in my parts cabinet. It's a pair of ring sets for an 82-83 DOHC I believe, sealed in their original packaging. Please verify for yourself but everything I've searched shows this. P/N: 26M-11610-40 Would trade for a...