Search results

I know the three stator wires should not have continuity to ground, but what about the two field coil wires? Should they? Resistance is fine but the show continuity and it is screwing me...

I have rechecked the leak and I'm pretty sure it comes from the wire grommet since the wires are not original in my bike so it like through the holes... Any tip on sealing these holes or the space left? Today I have tried with sealant and pushing the wires insides so ut covers the holes.

Quick question for you all: a year ago I changed all the seals (pushrod, kickstart...) except the front sprocket one. Could it be leaking from there? As I said, I checked with white powder but it didn't show leaks in the sprocket, could it be dripping from there to the left side cover lower...

Yes, like I said I have sprayed a white powder and it showed the two leaks but I guess I will have to do it again and re check... And yes, I have already changed the pushrod seal so it is not leaking there.

Hi, leaking again... This last week tried what everybody here says: clean and new gasket, result? Oil on the floor. Yesterday I tried to clean again and use some specific sealant and today I went for a ride really hoping this would work but I got more of the same. Plus, if it leaks from the...

Hard to tell since it all drips in the same direction. I cleaned and sprayed with a white moisture and it revealed the two leaks... Any good way to spot a leak?

Yes, but it also leaks in the lower part of the cover.

This was last weekend, you can see the sealant on the cover and this is the one I used: ceys j28 technobond. The leak always comes from the same spots, the lower side of the cover.

Thanks for your reply. Last I tried the OEM gasket and same result, leaking cover. I have tried the sealant this last time and let it sit for 5h to dry and form a solid gasket instead of soft, still leaks. I cleaned the surface with a cutter razor and made sure all was pretty clean, any...

This weekend I've tried to change gasket for sealant and let the sealant cool, anyonhe has experience sealing the rubber of the alternator cable?

Hi, I bought a Sanglas 400y three years ago and has been leaking on the left cover (alternator) since then some days a couple drops, some days more. My bike has the same engine as the xs400e so I've been reading the forum to fix this leak she has but it has been impossible. I have tried a new...

Hi I'm Dani, from Spain, I own a sanglas 400y (spanish made with a japanese engine) that has a leak on a crankcase bolt because aparently the PO tightened it too much. Here you have pictures (bolt 10) to identify it and I would like to know a good way to solve the leak by myself. I was thinking...