Search results

  1. E

    '79 xs400 rough>reliable>cafe 'Scarlett'

    No I just knew I needed a 5-3/4" headlight so I grab the one that was not so deep. The seller measured everything for me so it was great. I also tried to swap to led's but the flashers I have tried are not any good, cheap Chinese flashers. I am going to try and build an led tail light. I did the...
  2. E

    '79 xs400 rough>reliable>cafe 'Scarlett'

    Did you ever get the h4 headlight done? I had an issue getting a light for my 1977 dt400 I used a Harley Davidson 5-3/4" light it was the same depth as the sealed beam that came on the bike. Now I have a 55w and 65w headlight. Awesome upgrade. $10 on ebay I think. P.s. I also converted my bike...
  3. E

    Project Oliver; 1980 xs400 build

    Running open exhaust will cause excessive scavenging of the exhaust gases causing the exhaust valves to operate at a higher than normal temperature eventually burning them. Which is really them just wrapping.
  4. E

    OOPS

    Type in xs400 intake.
  5. E

    Just bought my first XS400

    look on amazon. 6 fuses http://www.amazon.com/HELLA-H84960091-6-Way-Lateral-Single/dp/B000VU9D1G/ref=sr_1_2?ie=UTF8&qid=1412706308&sr=8-2&keywords=fuse+block 4 fuses...
  6. E

    chopper wiriing, need help?!

    this is a generic wiring diagram. it covers everything you need for your bike to run. on a bike with a starter your ignition is a little different more wire for the starter function. if you want to keep it simple run a push button wired to solenoid, tap into the wiring around the ignition on...
  7. E

    OOPS

    wish i would have saw this earlier, i have a bike i am going to build as a ?????????? but i am not going to use any of the OEM parts and it has a battery box. not many piece most everything was in a box when i picked it up.
  8. E

    Failed "Razor Blade Test"

    post a wiring diagram for this bike and i can help you. i had the same problem with my DT400 and the light also cut out, on the DT the lighting and charging coil are on top of each other. so re-wrapping was easy. converted it from 6v to 12v with a re-wrap. also i have never heard of the razor...
  9. E

    Any tips for removing a Maxim 400 exhaust?

    i have not done this to a maxim but i had a vt700 shadow that i bobbed and i removed the center stand and everything before removing the exhaust in one piece, only to cut it later. not sure if your exhaust is similar but i dont think it could be to different.
  10. E

    Any tips for removing a Maxim 400 exhaust?

    crazy words.. :laugh::laugh: would be easy to take off as unit if possible.:thumbsup:
  11. E

    Making it kick only, do i still need solenoid?

    the starter should be on a seperate circuit independant of the e-start. but you do need the ignition coil to run.
  12. E

    Any tips for removing a Maxim 400 exhaust?

    look for kroll-oil. i would let it set over night but this stuff will penetrate a ducks butt. lol. i use it all the time when working on aircraft exhaust, and rusty bolts on sea planes.
  13. E

    Smoke from exhaust... normal or no?

    a little oil is not going to fowl your plugs. excessive oil will. if it looks like a bug spraying truck your going to need to fix it. and you can fix vavle seals without removing the head. use a compression tester hooked to a air supply good pressure, i always use 150psi. this will hold the...
  14. E

    Burned by mikes xs

    Its easy. I'm sorry.
  15. E

    '79 xs400 rough>reliable>cafe 'Scarlett'

    no not on any CT forum, i should be. just doing a lot of reading on this site until i pick a style to go with. thinking of going with a tracker style. saw one on a post called black and tan.
  16. E

    Lead Substitute?

    run unleaded. if it breaks fix it!!!!
  17. E

    Bike quits after a mile.

    if the carbs are dirty try running some SEAFOAM to clean it out before you pull the carbs out sounds stupid but try it. if it stall thats a fuel delivery, so the SEAFOAM may clean the delivery passages. but your carb probably need to be tuned.
  18. E

    air fuel mix problems

    Pilot circuit. are they clean? Pod = more air meaning more fuel. but if it dies it is the pilot circuit. i did a 4 bank that did the same thing it had a clogged pilot circuit on the #3 carb. after that was fixed the jets needed to be upped. Reclean, bench sync, start with stock jets...
  19. E

    Lead Substitute?

    Listen to "xschris". :)
  20. E

    Lead Substitute?

    what year is your bike? If you do not have hardened valve seats than you need to use a lead subsitute. if you have a 80's model bike its a safe bet that you have hardened valve seats. but to answer your question. if your engine requires lead because you have soft valve seats than not useing...
Back
Top