Anybody have access to CAD program?

[skillzman1]

I'm wanting to cross drill my brake rotors and was wondering if anybody could print me up a few templates to use?

Heres a picture similar to what I need.

only I want more holes like these.

what other info would be needed....rotor diameter I'm assuming?

 

[skillzman1]

the rotors are both 10.5 inches diameter...with 2 inches of surface material around the circumference.

 

[drewpy]

found this, which should help

here

 

[Dorzok]

Hey skillz
just sharpie right on the rotor. tape it to a piece of card board, draw a straight line through apposing holes to find the center, then get yourself a compass and have at it.

 

[Sokrates]

Hi...

in the early 70' there was an german company who drills brake disc's for RD/XS/SR/TX.

Here ist the german MOT certificate with an layout of the drills:

http://xs400.net/wb/pages/technik-faq/abes-gutachten/gutachten-ohnemus-gelochte-bremsscheiben.php

i hope it helps.

 

[skillzman1]

I poked around last night and found some patterns on a Honda cb site...took a bit of work to figure out how to resize for the actual template size...but I came up with one that should work.
Will post up when I do it.

Maybe a how to write up if I take the time!

 

[hardtailed77]

I poked around last night and found some patterns on a Honda cb site...took a bit of work to figure out how to resize for the actual template size...but I came up with one that should work.
Will post up when I do it.

Maybe a how to write up if I take the time!

Write-up.....please.....lol

 

[skillzman1]

hahaha...maybe I should have been a shop teacher....LOL

 

[CadXS]

Skillzman, I have access to CAD packages. If you need any templates drawing to scale let me know and I will CAD them up and send you a pdf or something so you can print them at home.

Caddy

 

[skillzman1]

thats cool....I think I found what I need....as usual its a round about way to get where I need ...but the destination should be similar...