1. Dismiss Notice
  2. Dismiss Notice
  3. Hey Facebook people... We've created a group for XS400.com members to connect. Check it out!
    Dismiss Notice
  4. Want an XS400.com t-shirt? Go to the store to order. Limited sizes and quantities available.
    Dismiss Notice

Frame mods

Discussion in 'The Garage' started by Cliff, Aug 6, 2019.

  1. Cliff

    Cliff XS400 New Member

    Hi all I have always liked flat track, street scrambler type builds and particularly based on the Xs series but never got round to doing one. I have finally taken the plunge and bought myself an xs360 that someone had already started. They have chopped the frame immediately behind the rear sock mounts. I have been looking for a pre made hoop to fit but am unable to locate one. Does anyone know of anywhere in the uk I may be able to find one, I Have measured the width from outside to outside and it is 250mm, all the ones I have seen on eBay are smaller. Many thanks in advance.
     

    Attached Files:

  2. drewpy

    drewpy Excess twin Top Contributor

    I was lucky, worked at Kellogg’s at the time and maintenance did mine.
    I’d go to an engineering company with your measurements
     
  3. sandmanred

    sandmanred XS400 Addict

    Maybe go check out some of your local bike nights and scope out some of the bikes that are clearly customized, the owner could be the builder or might share who did the work.
     
  4. markmakeitso

    markmakeitso XS400 Member

    You could cut a smaller loop in the center and add a spacer to make it wide enough to match your existing points. Just a thought.


    Ooorrrr:
     

Share This Page