1. Want an XS400.com t-shirt? Go to the store to order. Limited sizes and quantities available.
    Dismiss Notice
  2. Hey Facebook people... We've created a group for XS400.com members to connect. Check it out!
    Dismiss Notice
  3. Dismiss Notice

For Sale - Parting out 78 XS400 SE

Discussion in 'Classifieds' started by WCC, Jan 3, 2017.

  1. Max K

    Max K XS400 Member

    Do you still have the kickstarter, chain guard and the oil cap?
     
  2. WCC

    WCC XS400 Member

    15
    0
    1
    PA
    Let me check tomorrow and get back to you. I am pretty sure we do.
     
  3. WCC

    WCC XS400 Member

    15
    0
    1
    PA
    yes I have the kick starter and the chain guard
     
  4. Max K

    Max K XS400 Member

    Well I found out I don't have a kickstart Bc the part in the block must have been broken off by the previous owner. But if you still have the chain guard and oil cap I'll definitely get them.
     
  5. xschris

    xschris miles of smiles =)

    Do you have a sohc xs400 or a dohc xs400 the dohc don't come with a kick start.
     
  6. Max K

    Max K XS400 Member

    its a sohc
     
  7. stuartr

    stuartr XS400 Member

    Looking for the shift (foot) lever and possibly right side engine case. Shipped to 55421 Minneapolis

    -Stuart
     
  8. stuartr

    stuartr XS400 Member

    Also, left hand controls if the Hi/Low switch is complete and working
     
  9. WCC

    WCC XS400 Member

    15
    0
    1
    PA
    I finally got around to taking some pictures and here is what is left.
    Harness, headlight, headlight signal housing, relay, read tire,rim and brake, Front tire and rim but I do not think this is off a yamaha, rear swing arm and chain guard, front tree, right side controls with throttle cable, rectifier, voltage regulator , horn, gauges engine. Message for additional pictures. Thanks
     

    Attached Files:

  10. skintech

    skintech Keep both wheels on the ground!

    1
    0
    1
    Yuma,AZ
    How much do you want for the voltage regulator? (I assume it works?)
    Thanks, Skintech
     
  11. WCC

    WCC XS400 Member

    15
    0
    1
    PA
    The regulator came off a running bike but I do not know 100% if it is good. I searched around for a test but came up empty. I have attached some pictures. I will gladly test it. I was looking for $30 plus $8 shipping.
     

    Attached Files:

  12. WCC

    WCC XS400 Member

    15
    0
    1
    PA
    I checked out the regulator per some of the info I found and if there is voltage going one way and not the other then the diode must be good.
    Black wire in the connector to either side of the resistor 0.00v. From the green wire in the connector to the resistor 0.06v so it looks like the regulator is good since there is voltage going one way.
    See picture 2043 for back of the resistor.
     
  13. jim12

    jim12 XS400 Member

    Is the swingarm pivot bolt in good condition? how about the bushing tube it fits in? If so how much for the whole swingarm unit?
     
  14. WCC

    WCC XS400 Member

    15
    0
    1
    PA
    it is all in good shape. I will take some pictures and post them
     
  15. Max K

    Max K XS400 Member

    i will take the chain guard if it is still available.
     

Share This Page