Replacement cycle and maintenance of tires

Ceaserlle

XS400 New Member
Messages
1
Reaction score
0
Points
1
Location
uk
Replacement cycle tire recommendation 30,000 ~ 40,000 km to be replaced, of course, due to the different driving habits, often take a different road, the replacement cycle is relatively will change. 20,000 km owner is best to do a wheel alignment, calibration-wheel data, ensure the normal use of the tire to prevent partial wear. If the wheel alignment data is not accurate, it is likely to cause wear of the tires, reduce tire life, when the tread is less than 1 mm, the owner must replace the tire immediately.

Under normal circumstances the tire pressure should be maintained at between 2.3Kpa ~ 2.5Kpa, general 2.5Kpa appropriate before 2.3Kpa later. Tire pressure is too low, soft tire contact with the ground area is too large, the running resistance on the big fuel it big. Part of the tire contact with the ground deformation, long time and is easy to make the inside of the tire rubber cord fatigue, affect tire life; the ground plane to increase, when the road there are nails, fragments of glass midnight, rolling tires may greatly increase the brake performance degradation. Vehicle performance car parts tire pressure is too high bumpy ride quality reduced; a small area in contact with the road surface grip decline; prone to puncture hazard in the summer or high speed.
 
Back
Top