1. Having trouble logging in? Try closing your browser and re-opening it. If that doesn't work, try a different browser or device. The site will be updated soon to resolve these browser issues.
    Dismiss Notice
  2. Dismiss Notice
  3. Want an XS400.com t-shirt? Go to the store to order. Limited sizes and quantities available.
    Dismiss Notice

some modded xs400's

Discussion in 'The Garage' started by drewpy, Nov 19, 2010.

  1. drewpy

    drewpy Excess twin Top Contributor

    just been trailing my pictures on the pc and uploaded a few pictures of the vaious xs400's I have collected over the last 5 yeras. I got more somewhere.....

    [​IMG]
    450cc conversion
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. Ringo

    Ringo bznchris

    You've got my attention with that 450cc conversion, Drew. Any more info on that? Looks like new pistons/rings, cam and a bore job? Are the pistons from a different bike, or aftermarket?

    Planning on opening up the top end this winter to fix a leaky gasket, so I mind as well consider a big bore kit!
     
  3. drewpy

    drewpy Excess twin Top Contributor

    I saw it on german ebay a couple of years ago and nicked the pictures before they went forever.
    new Yoshimura sleeves drawn in, new high-compression Yoshimura pistons with 73 mm bore = capacity 440 ccm
    - cylinder head: completely revised with shortened valve stems, gasflowed, new valves (inlet 36 mm, exhaust opening 30 mm)

    supposed to make 50hp

    that's all I know
     
  4. Ringo

    Ringo bznchris

    Wow!

    It does seem like a little more work than I'm willing to do at the moment. And Yoshi pistons might be a little out of my price range... Sounds like fun though!
     
  5. gentlemanjim

    gentlemanjim More Wrenchin than Ridin

  6. CadXS

    CadXS XS400 Addict

    Another Gravel Crew style custom...

    [​IMG]

    Lovely simple build.
     
  7. drewpy

    drewpy Excess twin Top Contributor

    [​IMG]
    off the german xs400.de site

    its done in HDR a composite of 3 different exposures which pick out certin hues and tones. then its all put together to make an interesting photograph
     
  8. hammerlo

    hammerlo Iron Horse Riders

    Thanks Drewpy for inspirational images....
     
  9. cturek

    cturek XS400 Addict

    Very interesting photo!
     
  10. That HDR photo is awesome! I would love to have a picture like that of my bikes in the garage!!
     
  11. Is that a turbo-charged 400 I spy in the first post? Any more info on that? A turbo would be fun on these bikes!!
     
  12. Travis

    Travis Staff Member Staff Member

    ^ Sweet.. didn't even notice that before..
     
  13. drewpy

    drewpy Excess twin Top Contributor

    aye it is, I first saw it in classic motorcycle magazine for the north weald classic bike festival in the south of England 2nd sept 2007. Unfortunatly I have unable to track the owner (Paul Shivers) or his bike since, shame really!!
     
  14. Yeah, it is a shame! I would love to pick his brain a little on that setup!
     
  15. drewpy

    drewpy Excess twin Top Contributor

    found another pikkie of the Milvin xs400
    [​IMG]

    what he said
    I purchased this 1982 XS400 Yamaha a few months ago in good running condition, and have spent some time modifying in order to fit my personal preferences. Following is a brief description of the work that was done.

    CHASSIS: I stripped the frame and removed the rear frame loop, along with some extraneous tabs, then bent a new loop from steel tube. The major change to the bike was the conversion to a monoshock arrangement; a machinist friend of mine milled a length of 4.5" OD steel tube to my specs, which I then welded to the bottom of the frame. The single shock is a low mileage unit from an FZ6, and is set up to work in compression, as is normal. The rear end of the shock pivots, and the front end is allowed to slide along a set of milled slots, courtesy of a pair of adjustable thick-walled "rods". Adjusting the length of those rods allows rear ride height to be altered. Ground clearance has been increased, again just a personal preference, and the sidestand lengthened. The ride is very firm at this time. A different shock or spring rate could be employed for a softer ride.
     
  16. Bumpin this back up cause it's a righteous thread!

    [​IMG]

    [​IMG]
     
  17. drewpy

    drewpy Excess twin Top Contributor

    Petew likes this.
  18. there's a bloke who runs a bike shop in Lowestoft who, only today mentioned that very bike. I have the phone number off a guy on brit chop. I'll let you all know how I go on
     

Share This Page