Wiring harness on my Tracker

[nicknovice]

Man, I had all of my wiring issues licked. I then decided to simplify the mess, and now my lights don't work. I'm trying to figure out where I went wrong. I removed the right switch (run/off/run) wiring, and all of the turn signal stuff. My bike is just a kicker. I'm running a head & taillight, brakelight, horn, and an ignition switch. I have spark, but no lights. I'm just starting to dig into it. But I thought I'd hit you cats up first.

 

[drewpy]

hit me baby one more time....

 

[nicknovice]

Man, I searched "wiring" before I posted this. I have the diagram printed out and it's giving me a headache.

 

[drewpy]

just messing with ya man.

get your multimeter out and trace the live wires on my bike i needed to connect the left switch to get lights, don't ask me why, it was just loose and purple

 

[isigt]

On the left switch there is an option between hi/lo. its one power-wire and two that goes to the headlight (one for hi, one for low). If these ones aren't connected there will be no light (or just parking). Maybe thats it?