Wondering if someone might be able to help me. I’m clueless. I was about to get the bike registered again and found my wiring had dropped onto my rear wheel, breaking some of the connections. I’ve fixed the blinkers but having trouble with the tail light/brake light/plate light. Had the bike running and when I touched the black wire coming from the 3rd party tail light to another two black wires which were joined together, the tail light came on. So I joined those but now my battery is flat. Not sure if doing that cause the battery to drain or not. You can see from the pic attached that I still have a loose green and brown coming from the tail light and a loose blue an black coming from the bike. What do I need to connect up and what have I got wrong? Thanks in advance.