1. Having trouble logging in? Try closing your browser and re-opening it. If that doesn't work, try a different browser or device. The site will be updated soon to resolve these browser issues.
    Dismiss Notice
  2. Dismiss Notice
  3. Hey Facebook people... We've created a group for XS400.com members to connect. Check it out!
    Dismiss Notice
  4. Want an XS400.com t-shirt? Go to the store to order. Limited sizes and quantities available.
    Dismiss Notice

Xs400 Pushrod Leak

Discussion in 'The Garage' started by SupsChad, Nov 29, 2021.

  1. SupsChad

    SupsChad XS400 Enthusiast

    So my bikes push rod is leaking and I am having a hard time finding a place to buy its seal and bushing. Could anyone help me find a place to buy it? MikesXs just has the XS650s seal and bushing and I dont know if they will work with a XS400
     
  2. JPaganel

    JPaganel XS400 Addict

    Do you mean the clutch pushrod seal?

    upload_2021-12-1_11-51-17.png

    Available from Yamaha. Part number 93102-09245-00

    There are many online dealers that you can order from.
     
  3. SupsChad

    SupsChad XS400 Enthusiast

    I saw that diagram but for some reason thought it was wrong. I haven't actually taken the side cover yet to look at the push rod but from what I have read, it seems like its the culprit. Ive only watched videos of the seal replacement on a 650 and I dont think I have seen part numbers in the videos I watched (16,21,17,23, and the one after that). Thats why I thought this was a different part. But thank you.

    Just to clarify, I thought the only parts where a Bearing --> Seal --> Bushing --> Little silver ball and between them was the push rod.
     
  4. CaptChrome

    CaptChrome XS400 Addict

    It's probably worth the time to pull the sprocket cover off and have a look. After that, clean the case under the cover up, but the cover back on and ride the bike until you spot the leak. Then you will know for sure.
     
  5. JPaganel

    JPaganel XS400 Addict

    The time, by the way, is like 15 minutes. :)
     
  6. xschris

    xschris XS400 Guru Top Contributor

    Is your bike a sohc or dohc. Your leak might be actually coming from two other spots common to the sohc bikes. The neutral switch o-ring and the stator wires rubber grommet that goes into the motor.
     
  7. SupsChad

    SupsChad XS400 Enthusiast

    Im pretty sure its DOHC. Its a 1982 xs400.
     
  8. SupsChad

    SupsChad XS400 Enthusiast

    Oh ya I plan on it. I just have to wait till him back home from college, so Im just brainstorming possible things that could be wrong.
     

Share This Page