Recent content by BigDick

  1. B

    MODS HELP:hack attempt

    If you click the link above it shows the ip that hit me was based in the Ukraine.
  2. B

    MODS HELP:hack attempt

    Thanks for the info. I'll let you know if it happens again to my account.
  3. B

    MODS HELP:hack attempt

    Just got an email saying that someone attempted to access my account. It gave me this. Let me know if there's anything elseI can help with.
  4. B

    Site for rad start buttons? Attaching one to the frame.

    IMHO, make sure it's a weatherproof switch or in a weatherproof housing or you're going to run into problems down the road. Also check dime city cycles' website and lowbrow customs' site for awesome switches.
  5. B

    Starter Amperage

    The switch in the picture gives power to the full system. There is a switch on the handlebars which gives momentary ground. The switch on the handlebars is wired through to the relay which opens the circuit that gives power to the coils. The main switch (the one in the pic) just lets me start...
  6. B

    Starter Amperage

    Sorry, I didn't really explain well what's going on. Look at the attached schematic I drew up really quick in paint. It shows better than I explained what's happening.
  7. B

    Starter Amperage

    Exactly! Right now running a 35 Amp switch it runs power through the hot side wires going to the coil which gives the system power and ability for the engine to run. All I need is a switch with high enough amperage to handle the current going from the battery through the switch, to the coil wires.
  8. B

    Starter Amperage

    I have a momentary push button specifically for the starter circuit. I guess what I'm asking for is the overall amperage of the electrical system. Like I said, this is a race only bike. No lights, signals, horns, or anything else. I only have enough wiring for the bike to run and charge the...
  9. B

    Starter Amperage

    I have an 82 DOHC. Does anyone know off the top of their head what the amperage for the starter is? I'm wanting to put a rocker switch on my race bike but I'm concerned about finding one with a high enough amperage rating. Thanks guys.
  10. B

    Wanted - Right side late model carb body

    I have it done, I've ridden it at the track. It's just that now is the off season of racing and there's little things I'd like to change and modify so the bike will be better overall next season.
  11. B

    Wanted - Right side late model carb body

    Hey man, I appreciate checking, but those are the early model carbs, I have the late model where the idle screw and throttle cable linkage are on the outside right side.
  12. B

    New Guy, New Project

    The big problem being, I'm never happy. I just chopped the exhaust apart, I have to change the way the #1 pipe is routed. As it is in that last picture, the tire rubs against it when the suspension is compressed. I'm thinking about routing along and having that side cross over under the...
  13. B

    Wanted - Right side late model carb body

    Mine has the idle screw boss busted off as well as not having the bracketry to hook the throttle cable into. I'd really like to just swap out my #2 carb body and be good to go. Please let me know if anyone has either just the body or the bracketry that goes on the end of the butterfly shaft...
  14. B

    New Guy, New Project

    Ok, here's the full update on what I've done since the last round of pictures. So Eventually the bike was ready. It ran and everything (Video, clicky) Held up to field testing which I'm sure the neighbors adored (Video, clicky) Of course the first time at the track we were...
  15. B

    how to find the model threw the vin number

    Get on Yamaha's homepage. I forget exactly where but you can call with your vin and they'll tell you what you have.
Back
Top