-
Enjoy XS400.com? Consider making a donation to help support the site.
XS400.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
CaptChrome's latest activity
-
CaptChrome replied to the thread Carb slide does not go back down.Might be a lean condition/air leak at the carbs. If the bike is idling normally and you blip the throttle to send the revs to about... -
CaptChrome replied to the thread Just bought my first bike!!! Running lean tho :(.Welcome to the forum! AFR at idle is adjusted by the screw in this recess of each carb (see below). Screwing it out adds fuel. Other...
-
-
CaptChrome replied to the thread Another Day of Troubleshooting.I remembered overnight that there are a few other things that are required to use LED indicators on these bikes. So, here is the full...
-
-
CaptChrome replied to the thread Another Day of Troubleshooting.Did you install blocking diodes in the turn signal circuit? They are needed if you run LEDs as your turn signals. There are a bunch of...
-
-
CaptChrome replied to the thread Wanted - Manifold 2 into 1.That's what I was thinking of doing! But the Suzuki pipe has me interested now. Also, I see your oil cooler there. You have a fairly...
-
CaptChrome replied to the thread Wanted - Manifold 2 into 1.@RadlagerMike presents an extremely good option here! I am thinking of replacing my crappy, poorly made (in my opinion) MAC 2-into-1...
