Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS400.com?Consider making a donation to help support the site. XS400.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
HelloGentlemen,
As it turns out the problem was the woodruff key. Somehow it came loose in the rotor housing and lodged itself in the starter clutch. This allowed the rotor to spin a bit and throw off all my efforts to time the crank.
Thanks for your input. The best thing to learn is if what...
Thanks for the replies guys,
I'm sure i've got the cam and sprocket positioned correctly ( pips up, lobes down) so that makes me question the crank.
When i set the left cylinder to LT which is supposed to be TDC the piston has gone well past the top of its stroke and is travelling down again...
Hi Guys,
I am getting REALLY frustrated with this one. I recently pulled the head and bores off my bike to do some freshening up and new head gasket. Now when buttoning her up as I turn the crank bolt the piston contacts the exhaust valve. I've probably redone these steps 7 or 8 times now...
Probably the idle air mix screw since it has the spring on it. My left one hopped out a couple times from vibration and wear, i made a little cap for it. Luckily everything landed in the space behind the cylinders.
Well trying to start her up yesterday the kickstart lever snapped off at the pivot point. I wasn't jumping on it or anything, just 30 year old stressed metal giving up the ghost. These things happen.
I was wondering if any of you guys know if the xs650 kickstart lever will fit onto the 400's...
I can't believe I'm seeing this thread now! I just missed it. I'll do my best to make it out if we get an October ride. Kudos to you guys for actually following through and getting together.
I recently rewired my taillight and the way it worked was:
-the blue wires are the running light
-the yellow are for the brake light and
-the black wires are the ground
That seems like an excessive amount of wires coming out of the harness, You can likely reduce them down to connect the...
Almost lost it. Took the bike instead of the car around the corner to the bank (5 minute trip) and hit a massive oil patch covering the entire road, just looked wet. Immediately lost all traction and started shimmying side to side, can't say it was skill but I will say I was damn lucky to keep...