For Sale - Parting out 78 XS400 SE

Let me check tomorrow and get back to you. I am pretty sure we do.
 
Well I found out I don't have a kickstart Bc the part in the block must have been broken off by the previous owner. But if you still have the chain guard and oil cap I'll definitely get them.
 
Well I found out I don't have a kickstart Bc the part in the block must have been broken off by the previous owner. But if you still have the chain guard and oil cap I'll definitely get them.
Do you have a sohc xs400 or a dohc xs400 the dohc don't come with a kick start.
 
I finally got around to taking some pictures and here is what is left.
Harness, headlight, headlight signal housing, relay, read tire,rim and brake, Front tire and rim but I do not think this is off a yamaha, rear swing arm and chain guard, front tree, right side controls with throttle cable, rectifier, voltage regulator , horn, gauges engine. Message for additional pictures. Thanks
 

Attachments

  • IMG_1618.JPG
    IMG_1618.JPG
    190.7 KB · Views: 325
  • IMG_1609.JPG
    IMG_1609.JPG
    147.1 KB · Views: 325
  • IMG_1625.JPG
    IMG_1625.JPG
    140.4 KB · Views: 323
  • IMG_1634.JPG
    IMG_1634.JPG
    113.8 KB · Views: 341
  • IMG_1773.JPG
    IMG_1773.JPG
    213 KB · Views: 340
  • IMG_1784.JPG
    IMG_1784.JPG
    232.7 KB · Views: 333
  • IMG_1880.JPG
    IMG_1880.JPG
    101.1 KB · Views: 332
  • IMG_1887.JPG
    IMG_1887.JPG
    105.7 KB · Views: 343
  • IMG_1900.JPG
    IMG_1900.JPG
    129.7 KB · Views: 339
  • IMG_1905.JPG
    IMG_1905.JPG
    123.6 KB · Views: 348
  • IMG_1907.JPG
    IMG_1907.JPG
    88.3 KB · Views: 344
  • IMG_1903.JPG
    IMG_1903.JPG
    134 KB · Views: 326
  • IMG_1905.JPG
    IMG_1905.JPG
    123.6 KB · Views: 327
  • IMG_1912.JPG
    IMG_1912.JPG
    134.1 KB · Views: 333
  • IMG_1929.JPG
    IMG_1929.JPG
    217.1 KB · Views: 338
  • IMG_1920.JPG
    IMG_1920.JPG
    133.8 KB · Views: 345
How much do you want for the voltage regulator? (I assume it works?)
Thanks, Skintech
 
The regulator came off a running bike but I do not know 100% if it is good. I searched around for a test but came up empty. I have attached some pictures. I will gladly test it. I was looking for $30 plus $8 shipping.
 

Attachments

  • IMG_2043.JPG
    IMG_2043.JPG
    146.8 KB · Views: 327
  • IMG_2044.JPG
    IMG_2044.JPG
    151.2 KB · Views: 310
  • IMG_2045.JPG
    IMG_2045.JPG
    101.9 KB · Views: 323
I checked out the regulator per some of the info I found and if there is voltage going one way and not the other then the diode must be good.
Black wire in the connector to either side of the resistor 0.00v. From the green wire in the connector to the resistor 0.06v so it looks like the regulator is good since there is voltage going one way.
See picture 2043 for back of the resistor.
 
Is the swingarm pivot bolt in good condition? how about the bushing tube it fits in? If so how much for the whole swingarm unit?
 
Is the swingarm pivot bolt in good condition? how about the bushing tube it fits in? If so how much for the whole swingarm unit?
it is all in good shape. I will take some pictures and post them
 
Back
Top