Search results

  1. P

    the correct carb rebuild kit

    not my actual carb, found these on the net, but this is the exact carb i have, i ahve seen some with different choke setups, and different throttle setups, but this set is identical. if anyone can help me identify these, point me in the direction of a complete rebuild kit that would be awesome.
  2. P

    the correct carb rebuild kit

    yeah ive seen them, i just dont know which to order :banghead: guess it comes down to what carbs i have, i will post some pictures
  3. P

    the correct carb rebuild kit

    im not 100% sure what i have, I'll post some pictures tomorrow, brass floats though
  4. P

    the correct carb rebuild kit

    can anyone link me up to a good carb rebuild kit for my xs360? having trouble finding one.
  5. P

    Piston rings the problem?

    thanks!:thumbsup:
  6. P

    Piston rings the problem?

    do you happen to know the proper gap should be?
  7. P

    Piston rings the problem?

    top end is not off, i was hoping my problem wasnt internal, but my compression tests were low, and the one problem cylinder was low low, and i have some blow by so this leads me to think thats its piston rings. i want to measure first though.
  8. P

    Piston rings the problem?

    how can i see if my rings are bad? do i need to check the gap? really want to figure out if theyre bad before trying to track down a set...
  9. P

    __-Bay Win. Piston Rings

    if you have standard rings for a xs360, let me know!!
  10. P

    running on one cylinder! help! so close to get her running!

    ok so i uncorked the float bowl, an adequate amount of fuel came out, but the cylinder just wont run properly, it has spark, apparently it has fuel, and the compression is good, but it still pops alot like if it were running lean, without the extra heat.
  11. P

    running on one cylinder! help! so close to get her running!

    should i run it first? or just go unscrew it now? i havent had the bike on since last night.
  12. P

    running on one cylinder! help! so close to get her running!

    thats an excellent philosophy for fixing things! im going to have to start going with that haha, when you say float plug, do you mean the bolt in the bottom of the bowl?
  13. P

    running on one cylinder! help! so close to get her running!

    apparently not out of the woods yet...... i think my right cylinder is not getting proper fuel, the carbs are linked by a small tube is it possible to run two separate fuel lines? so i know the second carb is getting fuel?
  14. P

    running on one cylinder! help! so close to get her running!

    ive met cars that run like shit with the oil cap off, i assume its similar?
  15. P

    running on one cylinder! help! so close to get her running!

    i have no idea.....
  16. P

    running on one cylinder! help! so close to get her running!

    i replaced the cap and the cylinder runs.....
  17. P

    running on one cylinder! help! so close to get her running!

    cracked tappet cover seems to have been a vac leak? we'll see gonna get a new one morrow
  18. P

    running on one cylinder! help! so close to get her running!

    also seems like the exhaust has less coming out, and less powerful puffs, on the bum cylinder
  19. P

    running on one cylinder! help! so close to get her running!

    i figured out the high revving was the engine being starved for fuel, aka a lean mixture, i noticed my clear inline fuel filter was empty, so i switched my petcock from the "on" position to the "prime" position and then the engine settled back to normal idle speed. do you guys think that my...
  20. P

    running on one cylinder! help! so close to get her running!

    right cylinder timing seemed to be way off so i adjusted it to be correct. fired up the bike the left cylinder ran gpod as usual the right....nothing, after a minute of idling normal the bike went crazy and started revving really high, dipped a few times then died
Back
Top