Search results

I'll probably leave the right side on the bike to do it, the left side panels I'm more willing to take off. I bought some mothers last week when I detailed my bike. It really made all the aluminum and chrome shine. It didn't remove the oxidation on the fork covers or the engine case but it did...

Thanks for the writeup. I found a pic you posted of your bike and the side covers look great.

I might have to get some line and a T; I rode a few miles today and experiences the same symptoms. Pulled over and the cap I put on the line was gone again. I put another one on and zip tied it, rode around some more and it seems to be holding on. A side note, when I first reached down to feel...

Nope, I kept the vacuum petcock. The left side is connected to the petcock, the right side was capped. I have no idea how a cap wriggled itself off of that, but if it happens again I might just epoxy the spigot closed. Did you use an electric buffer on the engine covers? I used some mother's...

Took it for a short ride to let it warm up, then tried adjusting the adjusting the idle set screw and still had the issue. The right muffler was popping the whole time I was riding. I went down to inspect it and found that the cap over the right side intake boot port had somehow fallen off...

Tuesday I rode to the lake and back. Put about 26 miles on the bike and it rode great the whole time. I sat in this parking lot and let it idle for about 5 minutes and it did so perfectly maintaining 1200 RPM. Today I started it, let it warm up while I put my gear on, then rode a couple miles...

Fuel, air, spark. If it didn't start in a minute, it's not going to start after 20. I'd check fuel first. Make sure you have gas in the tank. If it's not full, make sure you're on reserve. If that doesn't work, turn it to prime and see if it will start then. I was having an issue where the...

I also noticed your engine looks shiny and brand new. How did you clean it up so nicely? A friend recommended a 600 grit buffer wheel for my angle grinder followed up by some polish on a foam polishing cone, but I am a bit hesitant to remove material

The white looks great. The paint on my bike is pretty beat up and I will likely repaint it at some point. I might pay someone to do it though, my experience painting a Suzuki gas tank was less than ideal and it came out pretty mediocre.

Beautiful bike. I know they suck compared to disks, but drum brakes on the front look so damn good. Was white a factory color or did you repaint it?

Yeah it was a pain. I followed this video and did it with the forks still in the bike. Basically I stuck the Philips screwdriver into the indent on the plunger and then leaned on the screwdriver, then used a pick to move one end of the circle out of its notch, then eased up on the Philips. The...

Pulled this off my 1980 special. These are just the brackets that attach to the front of the frame. The engine guard itself was in rough shape and discarded. Pay for shipping and they're yours

Wow opening the tops of the forks was a pain. Popping the handlebars off helped a lot Loosen the 12mm pinch nut here and use a flathead to pop the plastic cover off Push down with a big Phillips screwdriver then pop the circlip out. This is a pain in the ass because you are fighting the...

How to replace the shaft seals and fork oil on an XS400 I put the bike on a downslope on the center stand so the front wheel would be off the groubd Loosen but don't remove the 14mm pinch nuts. I also loosened but didn't remove the JIS/phillips screw above it. Remove the 2x14mm bolts...

We had a tornado miss us by a couple miles this morning but it's nice out now, so I just rode around the block for 20 mins. No issues, so it seems my original assessment that the vacuum line was simply kinked was correct. Unfortunately when I had the tank off yesterday, I decided to see what I...

I got my seat off today and pulled the tank. The vacuum line is a few inches longer than it needs to be and I'm fairly certain that it may have been bunched under the gas tank and kinked up. I was very careful aligning it when I put the tank back on this time. Its raining now so I don't feel...

I was able to get it off the bike by sort of pushing forward from the back. I think it just hit the latch and released it. The lever on the seat still seems to be functional but i think the spring may be incorrectly set

Old thread, but when the spring comes out would it prevent the seat from coming off? My bike has an issue where once I unlock the seat, the right side comes up but the latch on the left stays put and I cannot get it to release. I'm wondering if maybe my spring came unhooked or something. It's...

Yeah it works on prime just fine, but I am not familiar enough with vacuum peacocks to know if this is a normal failure that would be repaired with a rebuild kit or if there's something more going on. My ural had a vacuum petcock and when it started to go bad, it would allow fuel to flow in the...

Went for a test ride last night. Didn't make it far before the bike died. Pretty sure it was the battery so I walked it home and put it on the trickle charger - a challenge since I still haven't been able to get the left side of the seat to unlatch. Today it started right up, idled at 1200rpm...