Search results

measure from center of the swingarm bolt to the center of the rear axle, both sides need to be the same

lf it tastes like fish it's WD-40:D

my mail carrier is a fat old retired marine I'm afraid if I tried to hug him he would kill me

and with it your ground thru the cancelling unit good call Dave

yes, also does your bike use a single indicator lamp in the dash or two separate indicators?

does the flasher have (polarity) a plus/minus connection? you may need to move the plug in pins of the socket Brown to +, Brown/White to -

yes the electronic flashers work with LEDs or regular bulbs, they use capacitor charge time not resistance to "know" when to flash

the stock flasher uses resistance to function 2 27 watt bulbs + a 3 watt indicator 57 watt total losing the 3 watt indicator may make your flasher slower as it will take longer to heat up but it should still work, if you go with a electronic flasher that uses capacitor charge time you may have...

plates need to be soaked overnight in oil bath

it's possible you might have different lenght springs in your clutch, (old trick was to put in 3 stiffer racing springs and 3 stock springs) to improve clutch so they might be all on one side instead of every other one, you need to measure/inspect the springs then make sure plates are in correct...

here is a excellent thread from the XS650 forum that covers brake problems and what to do/how to fix it http://www.xs650.com/forum/showthread.php?t=7862

use electrical contact cleaner, take the switch housing loose from the handlebar so you can see inside to spray it while working the switch back and forth, WD-40 is a water dispersant not a cleaner or a lube, graphite conducts electricity, it would short out the switch contacts to each other...

Entropy = total darkness

year/model would be nice to know

50 mile ride, had it up to 95 on one nice open straight XS1100SG :D

a chunk of auto floor mat or mud flap off a truck work well cut to size

Yeah you don't have to believe most of what you hear, it's just stories :laugh:

you need to unplug the canceller unit, yes Br/W to center of new switch

3 times, but frogs are known lairs... how many of those princess and frog stories turn out well :shrug:

why take out the incandesent bulbs to get lower current draw then put resisters back in to raise current draw? proper LED bulbs and a electronic flasher