Search results

  1. O

    xs 400 starter oil leak

    nope, the big red circle is oil from upper hole from engine starter, thats just path of oil from the hole few minutes later after first picture
  2. O

    xs 400 starter oil leak

    hello guys, iam curently servicing one xs 400, bike is droping huge amount of oil, we reseal engine, but somehow its still drip. I found source of oil behind clutch and primary sprocket cover. My idea is: oil is going up on starter chain, seal from starter is not sealing and thru the hole in...
  3. O

    cant change gear

    yes, it was exactly the same issue, I discover this video and I try to move shifter link without removing the case cover. Successfully, take me about 5minutes. it was posted on this forum about year ago
  4. O

    cant change gear

    hello, i just do the topend rebuild with new pistons, bearings etc, after installing engine into frame, new oil, timings, valves etc i want to start the bike for the first time. But I cant move my shifter up or down.. I just stuck in gear and cant change it. I changed just the seal behind clutch...
  5. O

    xs360 oversize pistons + piston rings

    can I use them for 360 engine..? my actual diameter is 66mm, these are 69mm. Everything except diameter is same?
  6. O

    xs360 oversize pistons + piston rings

    Hello guys, can you please help me with searching for pintons and rings? Iam looking for set of pistons+rings for my xs360, but I can't find them.. minimum size, that I need is +0.25mm or bigger. It's possible to find them somewhere in USA? I was thinking about searching at ebay.de, but no...
  7. O

    Wrong Size H-pipe?

    anyone with h-pipe for xs 400 carbs there? Iam looking for them currently in europe, but they are little bit pricey. Thanks, Ondrej.
  8. O

    Need help with timing.

    Hello guys, I have same problem like LukeM, but I can't solve it.. My bike runs fine on left cylinder, but right cylinder is misfiring into exhaust when i start the bike. so I check timing, set the left cylinder first, was little bit late, now is ok, but i can't set right cylinder properly...
  9. O

    muffler gaskets

    ok, sorry, Iam from czech republic
  10. O

    muffler gaskets

    hello guys, quick question, Iam looking for muffler gaskets for my xs 360 14U, I ordered some gaskets from local dealer, but they are small, radius cca 28mm and I need 38mm inner radius, am I right..? can you suggest me someone on ebay, or maybe mikexs with correct gaskets..? Also Iam curious...
  11. O

    xs 360 carb switch

    ok, i will fix my old carbs, I tried almost everything, but cant get the mix screw out of body.. so i will try to drill carb body from back side if you know what I mean and push the screw from body out. https://dl.dropboxusercontent.com/u/17398563/drill.jpg Is there any risk to do this..? I...
  12. O

    xs 360 carb switch

    hello guys, Iam having some serious issues with my xs 360 during idling, because previows owner broke idle screw and almost half of screw stay in carb body.. so my right cylinder is too rich, right..? Iam thinking about switching from xs 360 carbs to stadart xs 400 carbs from xs 400...
  13. O

    77' xs360 14U from Czech Rep.

    yesus, iam happy, bike charges! so it's battery issue I guess
  14. O

    77' xs360 14U from Czech Rep.

    back from work, time to play! wires from the connector are: first line, 3wires: Green white-Green white-Red yellow second line, two wires: black, brown wire do you know what is it..? I have only very bad image quallity manual about bike, so I almost can't read the wire scheme chris, maybe...
  15. O

    77' xs360 14U from Czech Rep.

    Nope, this is almost same situation except my bike slide under car
  16. O

    77' xs360 14U from Czech Rep.

    I had an accident last year, pretty silly thing, but Iam ok, and I have plenty of spare parts :)
  17. O

    77' xs360 14U from Czech Rep.

    Thanks for pics chris, I really appreciate it. Now it's clear. I will to fix floats next weekend. But maybe i have bigger issue than floats.. :/ maybe is just old battery, but i guess there is something wrong with charging. I did small test ride today, and after about 700meters bike died under...
  18. O

    77' xs360 14U from Czech Rep.

    ok xschris, thanks for reply! it's little bit lame of me, but can you make some marks in my picture and show me where exactly main and pilot jets are? Because I don't know what you mean with "bowls". I read this topic, where you mention, that you are using standart jets with KN pods, do you...
  19. O

    77' xs360 14U from Czech Rep.

    Hello guys, I just bought this beauty, needs some cleaning and small repairs, but everything seems working. today I started with some minor repairs like front brake light indicator, horn and turns controlers, after that I started adjust carbs, but, where i can found main and pilot jet on...
  20. O

    xs 360/400 how camshaft swap

    Hello guys, I just bought xs 360 77 1U4, running well, but, I have also xs 400 4G5 82, with hot camshaft, 38HP, my question is, can i just swap camshaft from 4G5 to 1U4 and also adjust carbs, or also switch camshaft with carbs from xs400? Iam just curious if it's possible, engines looks...
Back
Top