1. Having trouble logging in? Try closing your browser and re-opening it. If that doesn't work, try a different browser or device. The site will be updated soon to resolve these browser issues.
    Dismiss Notice
  2. Dismiss Notice
  3. Want an XS400.com t-shirt? Go to the store to order. Limited sizes and quantities available.
    Dismiss Notice

81 cafe RE-build from Qc

Discussion in 'The Garage' started by oli36, May 15, 2015.

  1. oli36

    oli36 XS400 Enthusiast

    79
    0
    6
    Canada
    '81 cafe RE-build from Qc - Noobie

    Hey guys ! The newbie here again ! So i've decide to do a little build thread for my bike since there's more to do than I tought when buying this xs 400 !

    The story :

    I bought this bike roughly about 1 month ago, tried it before buying it and it was riding all good ! No issue for the first week.
    After one week with the bike in the garage the bike didn't wanted to start anymore :doh:


    I'm a newbie in the motorcycle world ! I've already learn A LOT of things from here and we the help of people here, thanks guys.

    SO here's the bike :


    [​IMG]
    What I've done to it :
    Valve adjustment
    Changed couple of rubber parts as the grommet olding the side panels
    pretty much it as for now !

    Things to do at the moment :
    Oil changed ( But the bike wont start so i can't warm up the oil)
    Front brake cable to shorten
    Make the bike run :doh:
    Find a kickstart
    Install new exhaust wrap
    Cranckcase cover gasket
    Get uni pods Filter and probably a retting.
    Install new spark plug (Iridium as recommended by Chris)
     
    Last edited: May 29, 2015
  2. oli36

    oli36 XS400 Enthusiast

    79
    0
    6
    Canada
    Video of the bike last time it was running (Starting problem, i had to old the throttle to keep it alive and make it start)



    And there's a video after valves adjustment !



    Bike was running and 1 week later ( Now, it don't want to start at all)
     
  3. oli36

    oli36 XS400 Enthusiast

    79
    0
    6
    Canada
    Update :

    Removed the carbs today, and took them apart to clean em.
    The inside was looking good, nothing major to clean.

    But what do I need to check exclatly when cleaning carbs ?

    I'm planning on getting unis pod filter so I guess I should jets the carbs right now as they are already apart ! What jets are recommenced to fit with UNI !?

    Thanks guys, couple picture here :

    [​IMG][/URL][/IMG]
    [​IMG]

    Tell me what you think about th inside of the carbs

    BTW picture are before i cleaned anything !
     
    Last edited: May 29, 2015
  4. Requiem

    Requiem XS400 Addict

    It is really hard to judge the carbs simply by looking at them. One of many tiny passages can be blocked and cause problems.

    Have you checked why the bike isn't running? Usually the problem is either in the ignition (no spark) or in the carbs (no fuel)
     
  5. xschris

    xschris XS400 Guru Top Contributor

    The bottom of that bowl has a lot of sediment in it. That stuff can plug any small passages in the carbs. You need to FULLY dismantle them and make sure everything is clean and clear. High compressed air ( 125-150lbs) works good. The hole in the bottom of the bowl is part of the idle circuit and needs to be clear. If you put carb spray down the top part it should drain out the bottom.
     
  6. oli36

    oli36 XS400 Enthusiast

    79
    0
    6
    Canada

    I think the problem isn't the cabrs but it's more of a spark problem. I've ordered new spark plug wires, cap and plugs since the previous owner didn't put the same caps on both sides ( one is 5 ohms resistance and the other have none)

    Thanks for the reply
     
  7. oli36

    oli36 XS400 Enthusiast

    79
    0
    6
    Canada
    Thanks for the reply chris. Im gonna make sure everything is clean then! And is there any how to video ? Of what to check ? The main and pilot , the bottom hole and what else ?
     
  8. xschris

    xschris XS400 Guru Top Contributor

    Search youtube. There was a member on here that had a video on how to. Look also in the manual for the breakdown of the carbs. There are lots of pieces to these other than main and pilot jet.:)
     
  9. oli36

    oli36 XS400 Enthusiast

    79
    0
    6
    Canada

    Allright i'm gonne give it a try ! I didn't know that i had to take them ALL aparts.
     
  10. oli36

    oli36 XS400 Enthusiast

    79
    0
    6
    Canada
    Update :

    I've decided to clean my tank using cider vinegar .
    I've let it for one day and there's what came out of there :

    [​IMG]
    [​IMG]

    I decided to let it sit for another day and see if it needs more thant that ! I've use a clothe to filter the vinegar and then reused it.
     
    Last edited: May 29, 2015
  11. xschris

    xschris XS400 Guru Top Contributor

    Dirty tank = dirty carbs. :wink2:
     
  12. oli36

    oli36 XS400 Enthusiast

    79
    0
    6
    Canada
    Yep !

    Just went through a little problem I wasn't able to unscrew the pilot jet on one sied ! And I've heard a lot of scary story about them being stripped in there ! Any suggestion ?
     
  13. xschris

    xschris XS400 Guru Top Contributor

    There are special tools that can remove messed up screws. If you have a shop near you I would let them get it out as the brass if very soft and ripping off the head more will just make it worse. Some people on here have used a small hex head bit in them after drilling a small hole for it to fit into. But if you don't feel capable then find a person that is. If if can't be taken out the carb is shot:(
     
  14. oli36

    oli36 XS400 Enthusiast

    79
    0
    6
    Canada
    Little update !
    After 2 weeks with the vinegar in the tank there's still sh*t coming out of there
    [​IMG]

    This week mail call :
    [​IMG]

    And i've take the carburator all aparts to clean them weel like Chris told me to do and this wasn't a bad idea !

    [​IMG][​IMG]

    And can anyone help with this :

    [​IMG]

    ¸I don't know if i have to remove them to clean or not but i wasn't able to do so. Since i didnt want to use force on these
     
    Last edited: May 29, 2015
  15. xschris

    xschris XS400 Guru Top Contributor

    There is an o-ring around them that keeps them sealed. Use a small set of pliers to twist and pull them out. It is a good idea to replace the o-ring and needle if they are old. That is the float valve and you want is to seal when closed.
     
  16. oli36

    oli36 XS400 Enthusiast

    79
    0
    6
    Canada
    Question :

    Hey guys the newbie again with question, again.

    When i bought my bike there was no kickstart lever on it and today i try to get the boss out (The boss was there but not the lever) and when i tried to spin the boss with visegrip the boss was not turning to it's original position. It was spinning freely and wasn't doing anything !

    So what could it be ? Should i be concerned about this problem ?


    And here's my gas filter !

    [​IMG]

    Should i change it or there's a way to get that crap out of there !?!
     
    Last edited: May 29, 2015
  17. xschris

    xschris XS400 Guru Top Contributor

    Replace the filter!! So the shaft spins and don't catch? You will need the remove the cover and make sure the assembly is correct. There are pics in the manual on installation. Then pickup a lever for it:wink2:
     
  18. oli36

    oli36 XS400 Enthusiast

    79
    0
    6
    Canada
    Delete please
     
    Last edited: Feb 5, 2016
  19. xschris

    xschris XS400 Guru Top Contributor

    Find another lower case or just use the e-start. Look in your sump filter for the missing bit. This has happen to a few others so don't feel bad. It happens when you
    "jump" on it or kick it to hard. Search the forum for broken kick start journal.
     
  20. lemonhead

    lemonhead Budget Biker

    These bikes do have an unexpectedly short kick on them. First time kicking mine over I thought I was missing teeth on the sprocket. I'm used to long kick dirt bikes, so, I see how easy it could be to kick the xs too hard.
     

Share This Page