Bike won't turn engine

dcrogers04

XS400 New Member
Messages
1
Reaction score
0
Points
1
Location
Rogers, AR
I fried my ignition coils, replaced them and now won't start. Also found white wires from stator melted together. Cut out bad wires and spliced together. When I run my key on and kill switch on to start the bike I have a massive voltage drop at battery. From 12.8v to 8v almost instantly. Turn my kill switch off and goes back to 12v. Sometimes it will try to turn the engine over but real slow and only a couple times before the battery is done and it clicks. Jumping straight to the starter does the same thing. Any help will be very appreciated
 
Back
Top