Has anybody seen a kit like this for our Mikoni BS34 carburetters, with the large range of jets.

R

Revvy Kevvy

Artic circle runner.
Messages
148
Reaction score
36
Points
28
Location
Sweden north of Uppsala
See picture but there seem to be kits that can be bought for carburettas that contain the whole range of jet sizes. Did anybody find one?

I find rebuild kits for our Mikunis but they have limited jet sizes, typically 117 - 128, three sizes only but these other kits have 30 or 40 choices.

I want to try and play with different ones over winter.

also: can old jets just be drilled out, so can a 120 be drilled out to make a 127. How does the needle like that?
also: moving the circlip up and down on the jet makes it richer (up to lean down to enrichen I understand) how much does it enrichen...can it make a 120 to the equiv of a 125 for example.
 

Attachments

  • mikoni jet set picture delete later for illistration only.png
    mikoni jet set picture delete later for illistration only.png
    707 KB · Views: 25
Ok, after a lot of searchiing and some back and forth with the emails I found this guy sells them and apparently they fit our BS34. So, to close this thread (as you know I always try to close my threads) you can buy a range of jets suitable for our Mikoni BS34 from:
https://www.ebay.com/itm/366229506537

I will update further if they fit or dont fit but unless the guy is telling me lies they should be ok.
 
Back
Top