Is it worth to buy for 950 CAD?

[Rolex1601]

Hello gentlemen and ladies, it’s my first post here, I recently saw a post locally. Buyer did the following restorations,

New battery, front and rear wheel bearings replaced, front and rear brakes replaced, front brake line replaced, master cylinder rebuilt with front caliper. New front and rear tires, new front and rear sprockets with chain, swingarm bearing replaced, electrical box replaced, headlight replaced with an LED light, wiring and spark plug replaced, both carburetors rebuilt with original jets.

And I am wondering is it the DOHC maxim version? What’s the things I have to check if I schedule an appointment with the seller? I know nothing about the mechanics so maybe I should skip?



Thank you all!

 

[vladimirmartin23]

IMO go see it, the price is really good if it runs, brakes are the weak point on these if old (i had to get a 19mm master just so mine could stop), do the other oil/filter changes. At 41k, you might wanna read up on the manuals, as you will 100% be the one to see it need engine repairs when it finally gives out. Also check valve clearance if you hear any weird noises or it runs weird.

Apart from that, do the usual: see if it starts cold (a cold compression test never hurts), no loud clacking or knocking, check for smoke and steady idle when up to temp, check if the suspension moves without a lot of stick and that the oil is at least semi clear at the viewport.

Another important thing: ask if they delimited it and changed the cams. Poor assembly without a torque wrench can and will make the sprockets shoot off or seize the bearings.

These basically force you to learn some mechanics at some point, but are a great first project compared to other more complicated bikes.

 

[Rolex1601]

IMO go see it, the price is really good if it runs, brakes are the weak point on these if old (i had to get a 19mm master just so mine could stop), do the other oil/filter changes. At 41k, you might wanna read up on the manuals, as you will 100% be the one to see it need engine repairs when it finally gives out. Also check valve clearance if you hear any weird noises or it runs weird.

Apart from that, do the usual: see if it starts cold (a cold compression test never hurts), no loud clacking or knocking, check for smoke and steady idle when up to temp, check if the suspension moves without a lot of stick and that the oil is at least semi clear at the viewport.

Another important thing: ask if they delimited it and changed the cams. Poor assembly without a torque wrench can and will make the sprockets shoot off or seize the bearings.

These basically force you to learn some mechanics at some point, but are a great first project compared to other more complicated bikes.

Thank you so much for your detailed response, I have checked the bike and it’s in pretty good condition, no modifications on the engine so I probably gonna take it.

 

[XSSmith]

Hello gentlemen and ladies, it’s my first post here, I recently saw a post locally. Buyer did the following restorations,

New battery, front and rear wheel bearings replaced, front and rear brakes replaced, front brake line replaced, master cylinder rebuilt with front caliper. New front and rear tires, new front and rear sprockets with chain, swingarm bearing replaced, electrical box replaced, headlight replaced with an LED light, wiring and spark plug replaced, both carburetors rebuilt with original jets.

And I am wondering is it the DOHC maxim version? What’s the things I have to check if I schedule an appointment with the seller? I know nothing about the mechanics so maybe I should skip?



Thank you all!

It’s not a DOHC Maxim unless the engine code confirms it (look for “12A” on the block). When you see the bike, check for oil leaks, charging voltage, coldstart behavior, and any odd noises. If you’re not comfortable mechanically, bring someone who is, don’t rely on the seller’s word alone.

 

[vladimirmartin23]

It’s not a DOHC Maxim unless the engine code confirms it (look for “12A” on the block). When you see the bike, check for oil leaks, charging voltage, coldstart behavior, and any odd noises. If you’re not comfortable mechanically, bring someone who is, don’t rely on the seller’s word alone.

from the pics, its 100% a dohc. dunno the VINs of maxims, but that engine is either the one on an 82-83 12E or 12F. Heck, you can even see the shape of the head made for 2 camshafts and the central chain room.