Wanted - Manifold 2 into 1

Location
Ulm / Germany
thanks Criss ...
yet due to me not having enough posts I can't send you pm
would you mind sending me a pm?
 
loooking for 2 into 1 manifold for XS 400 2A2
Need to shipped international (Germany)
Endtöpfe findet man schon noch, die Krümmer sind halt rar und müssen meisten selber gebaut werden

Was fast passt sind die zwei in eins Krümmer der Suzuki GS500E, die gibt es wie Sand am Meer
Das Verbindsrohr kürzen oder entfernen, ein bißchen warm machen und schon hast Du den passenden 2in1 Krümmer

Gruß Michael
 

Attachments

  • image.jpg
    image.jpg
    286.6 KB · Views: 10
  • image.jpg
    image.jpg
    278.1 KB · Views: 13
@RadlagerMike presents an extremely good option here! I am thinking of replacing my crappy, poorly made (in my opinion) MAC 2-into-1 system. Starting with a GS500 manifold is such a good idea that it will have to be on the list before I try fabricating one from scratch. The GS manifold may present problems in using the center stand, but I would cross that bridge when I get there.

This is the second GS500 thing I am aware of that might work on an XS400, the other being the carburetors. Both would take some effort, but they are certainly good starting points. Thanks for the tip!
 
11500 Rpm needs cooling on my 250 ccm ....

And also weightwatchers did. their work, 15% over all gear wheels
 

Attachments

  • image.jpg
    image.jpg
    251.9 KB · Views: 10
  • image.jpg
    image.jpg
    242.5 KB · Views: 8
Last edited:
Endtöpfe findet man schon noch, die Krümmer sind halt rar und müssen meisten selber gebaut werden

Was fast passt sind die zwei in eins Krümmer der Suzuki GS500E, die gibt es wie Sand am Meer
Das Verbindsrohr kürzen oder entfernen, ein bißchen warm machen und schon hast Du den passenden 2in1 Krümmer

Gruß Michael
Hallo Michael,

absolut richtig ... Enfdtöpfe gibt's noch - Krümmer so gut wie nie ...
Wenn die GS 500E Krümmer auch vom Anschluß/Flansch passen, sollte das eine super Alternative sein.
Hast du das schon versucht?

Danke und Grüße
Bernd
 
Back
Top