Will fit all sohc xs400 bikes. Off my 82 sohc, very clean and had about 500 miles on them when pulled. They where gone through two years ago with new 135 mikuni main jets, new float valve O-rings, pilot jet plugs, outer shaft seals, bowl gaskets and drain screw O-rings. Everything else was cleaned and was in good working shape. Mix screws are set to 3 turn out. Everything oem for this bike. 22mm foam float height, 42.5 pilot jet and stock 5GZ9 slide needles. Diaphragms are in good shape, crack free and pass the vacuum test. They have been in storage for the past year with red rubber grease on them. Like all carbs they will need to be setup for your bikes needs. $175 shipped in the u.s. paypal only.
Last edited:
