Recent content by XSDunn

Nothing really new the past week. Ditching the rear fender and the seat pan has been attached in the rear. Have any of you guys completely romoved the steering lock from the frame? I need to lop it off for headlight clearance

Seat pan! Needs a little trimmed off the sides but otherwise came out great.

If you want any pictures of anything specific just ask! If you made your seat pan out of fiberglass you could make a pocket in the bottom to hold the battery and fuse box. That would keep them up above the frame and hidden. It's an Antigravity 4 cell. Very compact and lightweight. I like...

Roughed in the electronics tray! Made out of 16 ga. (I apologize for the poor lighting)

I'm in the same boat haha I decided to ditch the factory harness and use a DIY kit from Sparck Moto which will hopefully help a little.

Thanks! Do you have a build thread?

Yes with 3/4" round stock and Two Hands Motorcycles sells the hoop!

Thanks!

Great quality products and they just switched to UPS as a shipping carrier so shipping was fair and fast.

Thanks and yah the whole bike is backwards haha

More progress! Removed the factory crossmember, and replaced it with .75 x .125 tube. Added mounts for the rear aluminum fender as well. Currently sitting at ride height with the Gazi shocks.

Got parts from Two Hands Motorcycles the other day! Got to work on the tail, more to come.

Made a little more progress as Im waiting for the rear hoop and fenders, the old factory rear master cylinder was shot and I bought a Brembo PS13 to replace it. Made some mounts (hardware is 6mm x 1.00) and turned a new push rod (threads are 8mm x 1.25) out of stainless which is about 3/4"...

Hey guys my names Alex I bought a '78 xs400 a while back and finally decided to start building her this winter. It's my first bike, I'm hoping to learn as I go and learn a bunch from my fellow forum members! Now the bike I bought disassembled as the previous owner who was going to turn it into...