Latest activity

Ah, thanks. Now I see the epoxy and the lack of the wire spring bulb holder. The halogen bulbs are so much better than the old sealed...

I pulled apart the old bulb and used a Dremel to open up the hole until the new bulb would sit in the reflector. I then used epoxy to...

So, it looks like you set the replacement bucket aside and mounted the entire new H4 bulb/reflector/trim ring assembly inside of the...

ok, i got it, you mean the Alien Model, how we call it in Germany

Head light bulb burned out so I put in an H4 bulb with a little bit of work. Now I'm waiting on new carb intake boots. I am going to...

yoThe piston head is not flat

D Remember that it must be for a 1983 XS400 seca

i have two +,75 for sale https://www.kleinanzeigen.de/s-anzeige/adId/2598917021

I sent you a mail already buddy

yo Hotmail. jowannypr@hotmail.com

No I don't have WhatsApp but what your gmail so I can mail you And I do speak Spanish also Danstorteon@aoI.com

yoYou have WhatsApp. And do you speak Spanish?

My fix for this, is after refinishing the metal and paint, go to the local auto parts store and get enough vacuum hose to cover the...

I think i have found a clue in the diagram for a sx650, there the B/W wire goes to a side stand switch.

You guys are fucking geniuses...just saved me a ton of work...my kick wouldn't work...adjusted the clutch....boom....workin. I love you...

Thanks @CaptChrome but i can’t take credit for the sub-frame that was the previous owner. But i think it looks great to. Then I will...

Nice looking rear sub-frame on that bike. You made it so that it does not look like an after-thought! I don't know a lot about the DOHC...

It is a mechanical tachometer, only mechanical wire from the engine and front wheel, but i don’t have the actual tachometer so I can’t...

Is it maybe a tachometer signal wire? I don't know enough about the late model 400's, but did they switch to an electronic tachometer or...