backfire

  1. Vacantstance

    Dumb question: starting bike without the gas tank on it.

    Again, I’m brand new to motorcycles. I’m finally at the place where I want to start the bike but I’m not able to. I have spark, decent compression and I’m feeding fuel directly through the fuel inlet on the left carb. As I pour fuel into a container that has a hose with the other end connected...
  2. P

    1976 XS360 incessant backfire

    Hey Guys, I have a 1976 XS360 with a backfire that has been plaguing me for a while now. It is only on the left cylinder, here is a list of things I have done so far to try and fix the issue. Adjusted points and timing (static and dynamic) Replaced points (only left, I got a set and the...
  3. S

    1978 XS400 Problems

    Hello all, and may I thank you for supporting such a wonderful and helpful site. Two weeks ago I bought a 1978 XS400 (2LO VIN) for $50. It had been sitting for 3 years, but had run when it was parked in a shed, or so the PO said. I brought it home and me and a friend sprayed some starting...
  4. motoman1979

    Charging system mystery!! Professional help needed!! it's....complicated

    Hey guys... Really need some help trying to sort out my '79 XS400. I've had some major issues along the way since day one with this machine and I'm close to calling it quites. If I don't soon my wife is going to force it!!! Background: I bought a 1979 Yamaha XS400 with 18000 kms on it. Has...
  5. Monowakari

    Clatter/Noise And Compression

    Hey, Changed my oil and adjusted valve clearances yesterday, now valves all within spec. Took a video before right cylinder intake valve was set properly. Didnt like the sound so went back over and checked all clearances. I just did a poor job on one of them (was .003 out! on an intake valve...
  6. bakeLit

    Left muffler pops

    My fellow riders, I have gone through everything (carbs cleaned, float level set, valve clearances set, carbs synched, timing and points gap set, mixture screws 3 turns out) and overall my '81 SOHC bike works fine. BUT the left muffler still pops quite substantially. I have found two tiniest...
  7. subt3rra

    chasing gremlins - engine/carb/??? issues

    Hey guys I am waiting on a clutch push rod seal to fix a leak, and while waiting I decided to sync the carbs now that my pipes are all welded up. Well I bench sync'd, reinstalled and fired her up. She ran, but kinda rough. Tweaked the mixture a bit more and things were about normal that...
Back
Top