Media added by TimmyT

Navigation

  1. XS400 Originals and Restorations 58
  2. XS400 Choppers 2
  3. XS400 Bobbers 26
  4. XS400 Trackers 14
  5. XS400 Cafe Racers 87
  6. XS400 Slightly Modified 30
Browse albums

Most media items

  1. ThePsuedoMonkey
    238

    ThePsuedoMonkey

  2. TimmyT
    168

    TimmyT

  3. dodger0129
    126

    dodger0129

  4. Philodoxo
    118

    Philodoxo

  5. A
    114

    arfstrom

Media statistics

Categories
6
Albums
1,010
Uploaded media
6,693
Embedded media
5
Comments
518
Disk usage
1.1 GB
view from the front with it all straightened out and the signal lights mounted and the handlebars on. Fork gaitors in place. Front fender is off on va

view from the front with it all straightened out and the signal lights mounted and the handlebars on. Fork gaitors in place. Front fender is off on va

  • 0
  • 0
this is the original petcock. I disassembeled it very carefully and checked all the seals. they were cleaned with the carb parts. Some were boiled and

this is the original petcock. I disassembeled it very carefully and checked all the seals. they were cleaned with the carb parts. Some were boiled and

  • 0
  • 0
this is a stubborn wheel bearing that had to be smashed out. But its ok because when you remove them you might as well replace them anyway. They are s

this is a stubborn wheel bearing that had to be smashed out. But its ok because when you remove them you might as well replace them anyway. They are s

  • 0
  • 0
my dad would be proud

my dad would be proud

  • 0
  • 0
this is a master brake cylinder that i picked up from a bike wreckers that says it would fit my year. It was a bit ceised up, but I lubed it up and go

this is a master brake cylinder that i picked up from a bike wreckers that says it would fit my year. It was a bit ceised up, but I lubed it up and go

  • 0
  • 0
this is the rear wheel assembly with the sprocket, circle clips ect. The only thing in the photo that is a spacer used for the rear axail pin is the r

this is the rear wheel assembly with the sprocket, circle clips ect. The only thing in the photo that is a spacer used for the rear axail pin is the r

  • 0
  • 0
duplicate photo of the rear wheel sprocket and axial assembly which reminds me to remind you to put the sprocket on the obvious side of the rear tire

duplicate photo of the rear wheel sprocket and axial assembly which reminds me to remind you to put the sprocket on the obvious side of the rear tire

  • 0
  • 0
Here is the cleaned egine with the worklight on it. The frame (or most of it) has been prepped for new paint.

Here is the cleaned egine with the worklight on it. The frame (or most of it) has been prepped for new paint.

  • 0
  • 0
the wheels, shocks , and rear springs have all been cleaned, greased, oiled, painted, and stripped respectivley. they are almost ready to be part of t

the wheels, shocks , and rear springs have all been cleaned, greased, oiled, painted, and stripped respectivley. they are almost ready to be part of t

  • 0
  • 0
this is the frame with the engine cleaned and nothing else mounted but the kick stand and center stand. the tape covering all of the important tags an

this is the frame with the engine cleaned and nothing else mounted but the kick stand and center stand. the tape covering all of the important tags an

  • 0
  • 0
is it all in one piece or a shipwreck?

is it all in one piece or a shipwreck?

  • 0
  • 0
yep a kickstart

yep a kickstart

  • 0
  • 0
here is the other side of the bike with the work light on. I have been doing 90% of the work in dull underground lighting and I would just say I can s

here is the other side of the bike with the work light on. I have been doing 90% of the work in dull underground lighting and I would just say I can s

  • 0
  • 0
this is a picture of the petcock parts off of a later model petcock that fit my gas tank mount specs. Take note of the oval seal because the tank is m

this is a picture of the petcock parts off of a later model petcock that fit my gas tank mount specs. Take note of the oval seal because the tank is m

  • 0
  • 0
FINALLY the bike has been brought home so I can get more work done ... only problem is the outlet 100 ft away!

FINALLY the bike has been brought home so I can get more work done ... only problem is the outlet 100 ft away!

  • 0
  • 0
lettin some hair grow. taking a break from torquing a few things to spec. working on the bike is like hanging out with an old buddy, I just put on som

lettin some hair grow. taking a break from torquing a few things to spec. working on the bike is like hanging out with an old buddy, I just put on som

  • 0
  • 0
the steering stem assembly is in place and awaiting orders from my torque wrench. remember to be weary of any forks getting tightened crooked, also ch

the steering stem assembly is in place and awaiting orders from my torque wrench. remember to be weary of any forks getting tightened crooked, also ch

  • 0
  • 0
I like it

I like it

  • 0
  • 0
front signal lights are on and from the side this bike looks like it could be a 60's roadster or some other early bike. It is super simple in a compli

front signal lights are on and from the side this bike looks like it could be a 60's roadster or some other early bike. It is super simple in a compli

  • 0
  • 0
tape is off the front tire and the handlebars are on because the bolts in the tripple tree and controll plate mount have been dealt with. keywords, ba

tape is off the front tire and the handlebars are on because the bolts in the tripple tree and controll plate mount have been dealt with. keywords, ba

  • 0
  • 0
Clutch and cable, both brake cylinders, calipers and lines. Rubber is a bit cracked but they are still holding up otherwise. I am definatley bleeding

Clutch and cable, both brake cylinders, calipers and lines. Rubber is a bit cracked but they are still holding up otherwise. I am definatley bleeding

  • 0
  • 0
another duplicate photo of my cleaned rear wheel and painted alloy front wheel, the rubber fork gaitors i got would stretch over my split dust covers

another duplicate photo of my cleaned rear wheel and painted alloy front wheel, the rubber fork gaitors i got would stretch over my split dust covers

  • 0
  • 0
holy crap more prepping...

holy crap more prepping...

  • 0
  • 0
paint is done, painters tape is mostly removed and the re assembly can begin. since i need to worry about balance first and weight shifting because my

paint is done, painters tape is mostly removed and the re assembly can begin. since i need to worry about balance first and weight shifting because my

  • 0
  • 0
Back
Top