Recent content by cdh_3752

  1. C

    Wanted - Front fender/Tank Emblem 1982 XS400J Maxim

    I've got a black front fender in good shape if your still in need.
  2. C

    Wanted - xs400j maxim side covers and front brake caliper

    Hey I've got a maxim I'm turning into a bobber and believe I've got the pieces your looking for.
  3. C

    At the end of my wits!!! carburetor woes

    well I got the bike running today. Did a little adjusting and its running great! However I had to pull the carbs off (hopefully for the last time) to add lock tight and properly torque down the brackets, But hopefully tomorrow I can finish wet sanding/ polishing the paint and get everything back...
  4. C

    At the end of my wits!!! carburetor woes

    The leak is fixed !!! Picked up some new orings and they solved the problem, Ill hopefully finish adjusting the carbs tomorrow and get the bike back together. On another note What spark plugs should I use Im going to switch mine out but not sure what to look for.
  5. C

    At the end of my wits!!! carburetor woes

    can someone further explain the alignment process? all the manual says is to lay both carbs on a flat sheet and put the brackets on. Is that all there is to it? when you put the brackets on and tighten them down wont it sit the same either way?
  6. C

    At the end of my wits!!! carburetor woes

    I tried Teflon with no success. However I didn't know anything about aligning the carb bodies. Ill look that up in a moment, I assumed that the two brackets being tight would align them. guess not thanks for the tip.
  7. C

    At the end of my wits!!! carburetor woes

    I just pulled the carbs off of my 83 maxim for the 5th time this week, this time because of a leak I swear thing does not want to go back together. It seems to be leaking from the tube that runs between the carbs supplying gas It has two o rings on either side. does anyone know what size these...
  8. C

    new guy here 82 maxim 400

    Thanks. I do plan on keeping it pretty much the way it is for the rest of the season . And I don't really plan on completely changing the bike up just a few simple mods to make it my own. I really like clean and simple.
  9. C

    Newbie here! Questions about my 89XS400.

    maxim has a dual overhead cam and rear mono shock I believe the frame is different too? I know mine has no frame under the engine it just mounts from above and behind. from what I understand its essentialy a cheaper version of the seca. aside from that I dont know a whole lot about it. Im new...
  10. C

    new guy here 82 maxim 400

    Just wanting to introduce myself. Names cory I picked up my maxim about a month ago as my first bike, and ive got to say im loving this thing:bike: I've got lots of ideas of what id like to do with this bike but low funds to accomplish them with. so far i've :adjusted carbs :changed vacuum...
  11. C

    Newbie here! Questions about my 89XS400.

    Looks like an 82-83 maxim. Im sure someone will chime in to tell you exactly what you have.
Back
Top