Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS400.com?Consider making a donation to help support the site. XS400.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Forgot to say i still have a fair amount of popping from my left exhaust on decel and idle iam guessing it could be one of two things 1: bad plug/ignition 2: airleak on left carb.
can a lean condition cause popping in the exhaust.
jar when you say float height, is it the one where you meassure...
Thanks for all the input, i cleaned the carb again last night (and yes i do have other things to do in my life :-) ) and reajusted the float height with just 2mm so its now around 22mm
and it runs better now it seems to not get so hot i messured 110 degres where spark plug sits on the engine...
hi cutlass
yeah its tiny, but its stock size for my bike, will change it once i go with the kn filter, but need to get the carb tuned in stock before i start to fiddle around with jetting.
Cleaned the carb out again last night after i found the gas filter from the petcock on the buttom of my...
ok read that somewhere too, but the thing is i havent done anything to the float hight, while cleaning it, what throws me off a bit is that its both cylinders that run lean, indicating either insufficient fuel or an airleak that effects both carbs.
well the boots look fine i, think they have been changed by po they have that new rubber look and seem flexible, about the carb its the first time i have taking a carb apart but i am pretty sure everything is put back together correct, took it apart again last night and it "looks" clean.
1...
I ordered some new diaphragms for my carb, (could see through the old ones) its the ones where u reuse your slides and put the new diaphragm over the slide it fits and looks like a good product, while i was waiting for the diaphragms i cleaned my carb at work in an ultrasound cleaner just to do...
wow looks just like my kind of thing i will try it out, found some original ones here in denmark but they are 100 euro each :yikes:
Thanks for the input will let you know how it turns out.
Hi All
I bought a kn filter 2970, its an two in one open filter and some new main jets from sigma6 and finally got around to taking the carb apart, i noticed that the diaphragms are pretty worn out. i checked my haynes to compare the ones i have and can find on the internet but im am not sure...
the dimension are a little off but when you use the things that hold it in place "dont know the english word" it fits.
and about the filter i actually found it on this fantastic site if you search the name of the filter i think you will find a thread, so cant take the credit for that.
also i...