pods

  1. Monowakari

    Idle Hesitation/Bog - '78 xs400

    Tore my carbs apart and cleaned them thoroughly with carb cleaner. Set the timing to be fairly accurate and point gap is perfect. Valve clearances all within spec on the tighter side (quite quiet now, might have read my old posts on the valve train noise, has all but gone away now with valves in...
    • Monowakari
    • Thread
    • adjustment adjustments bog bogs carbs carburetor down float height gurgle hesitation ignition pods rev revving rpm rpms throttle throttling timing xs400
    • Replies: 8
    • Forum: The Garage
  2. bakeLit

    Introduction, maintenance and backfiring problem

    Hello there, guys (and girls, perhaps?), First of all, I might use this post as a way of introducing myself to the community, as I've bought an '81 SOHC XS to play with for the summer (with no side covers, yes, I know). I've already ridden about 800 kilometers and thought I would never...
  3. lance woolery

    one 77 xs400 cafe done

    finally all done with my cafe build:bike: its a 77 xs400 with 2 into 1 exhaust and pods. the mods i had to do for those is one up on pilot jet (size 45) and 2 up on the main (size 140) float hight at 26mm and mixture screw it turned out 3 1/4 turn. plugs are a nice brown color lots of power and...
Back
Top