Wanted - A piece of your old 81 frame

[Steve Whitton]

Hi all, in need of the part of the frame that the right rear flasher attaches to. So if anyone has this piece you've cut off for your bobber project or have and old parts frame, I need it.

 

[short1]

Where are you located?

 

[Steve Whitton]

California

 

[short1]

Do you need the whole back section or just a pc of it? I believe I got one laying around

 

[short1]

Here's what I got, the right side is bent on the bottom a little. i was gonna toss it so if you want it just pay shipping and I can get it sent to you, if not that's ok too lol

 

[Steve Whitton]

Thanks, mine is bent also, trying to find a straight piece. Appreciate the effort.

 

[short1]

No problem, good luck!

 

[Steve Whitton]

No problem, good luck!

I've been pondering this piece. Is the portion where the rubber damper is for the rear flasher still perfectly round? If so I might still take the part and straighten the bent area with heat amd a vice.

 

[xschris]

I have fixed this area before where the signal mounts. No heat or anything like that just some pressure with a pry bar and clamps. Just be careful with the small tabs inside the round part as these will align the signals.

 

[Steve Whitton]

Thanks, will give that a try.

 

[short1]

It's still pretty round but there is a little pinch on the bottom

 

[Steve Whitton]

It's still pretty round but there is a little pinch on the bottom
View attachment 32109 View attachment 32107 View attachment 32108

This will work, I'll get back to you later with details