I need a picture

[thlillyr]

I have an 82 xs400rj I am missing my idle screw bracket. The previous owner made a shoddy bracket out of sheet metal. Its annoying cause the metal is flexible so my idle is always change at each light. I have no idea what the right one looks like so I don't know what to look for. Can someone provide a picture of their idle screw bracket? plz?

Heres what My bike looks like. And my shoddy idle bracket.

 

[drewpy]

AFAIK its part of the casting, will need to get creative and dream up a killer tab

 

[226dark]

XS400RJ - 1982

don't have a seca, wish could be more help.

 

[drewpy]

its the wrong side

 

[thlillyr]

Drewpy is right I can see where it was broken from the casting. Good thing I know a few good welders.

 

[drewpy]

might be too much zinc content in the metal to weld, it'll just splatter. see if you can get just a carb body

 

[226dark]

Not sure what the yellow circle is about.
Love the YOC

http://yamahaclub.com/forums/topic/21411-1982-yamaha-seca-xs400-questions/page__p__117653__hl__+xs400rj%20+seca

Scroll to very end for pic.

 

[thlillyr]

Yeah the yellow circle was for another forum post.