jlearning1
XS400 Enthusiast
- Messages
- 85
- Reaction score
- 0
- Points
- 6
Hello
I have read many of the threads and forums and I am still a little shooken with questions.
1. How do you adjust the carb floats if they are not 26-28mm? Do you bend the float tab up or down to achieve desired height? I do know the carb must be upside down to measure the correct height
2. Pilot Jets. Do you turn them all the way down in the housing, and then back them out 3-3.5 turns?
3. Main Jets- I am not sure what you do to them?
4. Are Pilot Jet and Pilot screws the same thing?
5. Idle Speed Screw- Set the idle to 1200RPM?
6. How do you measure the floats for correctness?
Thanks
I have read many of the threads and forums and I am still a little shooken with questions.
1. How do you adjust the carb floats if they are not 26-28mm? Do you bend the float tab up or down to achieve desired height? I do know the carb must be upside down to measure the correct height
2. Pilot Jets. Do you turn them all the way down in the housing, and then back them out 3-3.5 turns?
3. Main Jets- I am not sure what you do to them?
4. Are Pilot Jet and Pilot screws the same thing?
5. Idle Speed Screw- Set the idle to 1200RPM?
6. How do you measure the floats for correctness?
Thanks