Recent content by dongrady

you need something like this for easy install. but almost anything can be made to work. http://www.mikesxs.net/product/40-1901.html

according to mike's xs site, it looks like you need this to use the carb. http://www.mikesxs.net/product/48-7500.html

no way to know till you get inside and measure.

metal filings can cause severe damage to bottom end bearings as well. the crank bearings are cheap.

here's mine during mock up....torn down to the frame right now.

just let me know how it works out, i haven't got to the point of wiring yet.

i got a set from ebay Attachments removed by sellers request.

i've been on to other projects lately, tore into my cb900 to find the fault. cam chain tensioner disintigrated, pieces scored one piston and bore. parts on the way, on to plan b. 75 cb 360 with 6600 miles needing head bolted up and all work envolved. got the head torqued and cam in. while timing...

whole lot of fun in a very small package!

can anyone snap a picture of their timing plate on an electronic ignition plate? i must have screwed up when i made the reference marks and a i need a refernce point to get close. thanks.

exaust headpipes?

will my 82 coils work for points? wiring from scratch(with help), so the harness won't be an issue.

will the cdi from a sohc work on a dohc? thanks

how much should i ask for a cdi box? i have a guy asking for one and i have no idea how to price it. thanks.

check for air leaks, hoses coming off of intake boots, seal at carb's or even the intakes themselves.