Carb clamps for engine

[armyofda12mnkeys]

so I noticed the carb clamps on the engine side (not the airbox side), are thicker and the carb mounting rubbers has a lil indentation space to fit a nice thicker clamp.

I bought these from MikesXS, they work, but they are too thin so would like to replace.
2 x Band Clamp - BS34 Carb Holders (15-0672)
2 x Band Clamp - BS38 Carb Holders (15-0673)

I was hoping for a black colored clamp, that is thick so it fits nicely there, and looks like should fit the carb engine mounting rubbers which are around 52-53mm wide.
I think maybe ive seen silver colored ones, but not black (which would look cooler on my bike ).

Any ideas where can find one that fits?
Thanks guys,
Arian

PS i think these are the best I could find:
http://www.ebay.com/itm/STAINLESS-J...00-SR500-XT500-YP400-Majesty-78-/271585064323

 

[xschris]

I would look for some stock ones as they where designed for the boots. If you can find a set of xs360 boot covers that would be even better. They hold the boots even tighter and keep the rubber from flexing.

 

[rshutchinson]

Go to a local hydraulic shop, they should have band clamps in different sizes in stock or be able to order them.