buzzstpoint
XS400 Enthusiast
Carb dipped and cleaned. Every seal and o-ring has been replaced. I've benched synced and manometer synced the carbs.
Acceleration is great. And speeds above 25ish are fine. Seems like if I am slower then20 or low rpm the engine is boggy and jerky. Have to feather the throttle then it gets a burst of speed.
As of now the idle air screws are about 3 turns out.
Any ideas ?
Acceleration is great. And speeds above 25ish are fine. Seems like if I am slower then20 or low rpm the engine is boggy and jerky. Have to feather the throttle then it gets a burst of speed.
As of now the idle air screws are about 3 turns out.
Any ideas ?