Two Wheel Mafia
www.twowheelmafia.com
Brake Pivot : Orig $ 55 + Shipping & Handling
Mention your from the XS650.com or XS400.com Chat Fourm and recieve 10% Discount.
Everyone knows and complains about the big ugly stock rear drum brake pivot system, so here is our solution; a much smaller compact design with all the stopping power of the full stock size. The pivot and the mount are cut out on the water jet for a precise cut and fit and all the welds are done from the back for a very very clean but strong look.
Pivot Mount is designed tall for 2 different type of mounting options. 1) You can just cut some off the bottom, to your desired height and weld it directly to the frame rail or 2) My way which is cut a "piggy bank" slit in the frame rail and drop the mount in and then weld it for extra strength.
The pivot itself comes stock with a 5/16 NF 24 (fine) thread count bungs to except a ball joint elbow that you can get and any Honda lawn mower dealer so you can connect them to the brake and forward control rods (which I also sell and can make to any length you wish).
If the 5/16 NF 24 (fine) thread count bungs do not meet your need, just tell me what your thread needs are and I'll custom make one for you.
Options: Another option is a spring back or brake light switch attachment. For no additional cost I can add an extra rod to the pivot for you can attach a spring. (See pics of my bike)
If Interested you can contact me directly at frankr@twowheelmafia.com for more info.
Please be specific on that your are ordering, how many and an address for prompt delivery.
Mention your from the XS650.com or XS400.com Chat Fourm and recieve 10% Discount.
Everyone knows and complains about the big ugly stock rear drum brake pivot system, so here is our solution; a much smaller compact design with all the stopping power of the full stock size. The pivot and the mount are cut out on the water jet for a precise cut and fit and all the welds are done from the back for a very very clean but strong look.
Pivot Mount is designed tall for 2 different type of mounting options. 1) You can just cut some off the bottom, to your desired height and weld it directly to the frame rail or 2) My way which is cut a "piggy bank" slit in the frame rail and drop the mount in and then weld it for extra strength.
The pivot itself comes stock with a 5/16 NF 24 (fine) thread count bungs to except a ball joint elbow that you can get and any Honda lawn mower dealer so you can connect them to the brake and forward control rods (which I also sell and can make to any length you wish).
If the 5/16 NF 24 (fine) thread count bungs do not meet your need, just tell me what your thread needs are and I'll custom make one for you.
Options: Another option is a spring back or brake light switch attachment. For no additional cost I can add an extra rod to the pivot for you can attach a spring. (See pics of my bike)
If Interested you can contact me directly at frankr@twowheelmafia.com for more info.
Please be specific on that your are ordering, how many and an address for prompt delivery.