Recent content by meatfiend

My flasher doesnt have a black lead going to it...It has a green and yellow wire I believe which goes to the self cancelling unit which is correct as per the wiring diagram in my manual. I tried disconnecting that lead and grounding it when I replaced my switch with a switch that came from a...

D'oh! Signals wont work at all..bulbs are all good too, so thats not the prob!

Hey Gents, So Im still stumped on my signal lights. Thought I had a defective flasher unit, got a new one, but that wasnt the problem. Im wondering now if it might have anything to do with the self cancelling unit? If this part is defective will the signals still work? Is there a way to...

Incredible man!

Anyone know where i can purchase new inner fork tubes? Checked out Mike's but it looks like he only has them for 650's

Im shopping around for forks for my xs 360 as the inner tubes on mine have become rusted and pitted. I have a couple bike salvage yards in my area and Im wondering if the xs 400 forks will bolt right up to my bike? If not, does anyone know of another swap i could do fairly easily?

Hey Gents, So I think my carbs might have swallowed a bit of debris and Im suspicious that my main jets might be clogged. Does anyone know what carbs are on the 360's or have any diagrams of the of the carbs? I got a shop manual but its only showing diagrams of the 400 carbs and I'm pretty...

Thanks a lot! tried that this morning and got the lights working when i bypassed the flasher so Im bound for ebay tonight! Thanks again!

I had my tester out and checked for charge on both sides of the fuse.

Yep, all my fuses are good.

First post here! Hope someone might be able to help. I have a 76 360 xs and the turn signals wont work at all. Ive looked at a couple other threads dealing with the 400 and I found a section in the 400 manual describing how to troubleshoot the signal lights. The manual says to check for power on...