Recent content by vishal

I have the UNI filter the exact same ones as you mentioned. I will mount those on and see what the response is. Will keep you posted!!!

Hey XSchris, I have attached the pictures of the filters and the spark plugs. BTW on spark plug had black residue and other was like new.

The YouTube page hold on here is the link again also park plugs are clean but smell like gas.

Plugs are clean just put in new ones and checked also the float is at 26 mm.

Hello Guys, I have 1979 Xs400. I have been struggling with getting it started and idling. Today I replaced the main jets which were 132 with 145 the bike started after some staring fluid and then just died. Here is the link to youtube video https://youtube/15hVmwDLv44. Please let...

Hey XsChris I changed my main jet to 145 and idlescrew jet to 4 turns out idles awesome at 1300 rpm after I get it started with starting fluid. I can also rev it up to 8500 rpm no problem no smokes little backfire on right side cylinder. But as soon as I put it in first gear the bike dies...

So with Stock exhaust what jet size will you recommend with pod filter?

any recommendations on exhaust ?

Hello guys, I have pod filters on this bike and would like to know what is the correct size of jets i need to get this bike to idle around 1200RPM. I plan to upgrade the exhaust too... open for suggestion. Main Jet: ?? Pilot Jet: ?? Pilot Air Jet: ??

Hello xsxhris I have pod filters on this bike and would like to know what is the correct sixe of jets i need to get this bike to idle around 1200RPM Main Jet: ?? Pilot Jet: ?? Pilot Air Jet: ??

Can you guys help me with the oil drain bolt and oil filter bolt? I cannot find one anywhere?

Hello Guys, So I bought this xs400 1979 few ago. I pulled the carbs out and changed the carb holders and air filters. The bike started right off in one kick after that and idle without choke for few minutes I even took it out for a small ride. I had checked the oil level before I started and...

Hello Guys!! I finally got my carb holder and out the carb back on the bike after cleaning it the bike started in one kick with choke and idle for a while after that but then smoke started to come out the left side when I looked the side stand for oily!!! Please help!!! also the oil light stay...

Thanks guys!! I have a small crack on the exhaust will this affect my carb tuning or can this stop my bike from starting. The crack is around the circumference of the exhaust 4 inches from the outlet end.

Yes I did remove the rubber from the other side also I want to replace the fuel bowl drain plugs as they are stripped but I cannot find the place to buy them from or the correct dimensions. Can some one please help me with this? also I found the carb holders to be cracked so ordered new ones...