Wanted - canadian needle jet

[salisride]

looking for a set of canadian needles jets and jet needles original or ones from mikesxs.
needle jet should be 336-yo and jet needle 5ix11

 

[xschris]

Are you looking to put them in a xs650 or a xs400?

 

[salisride]

I wanna try them on my 400 but if they don't help ill put them on my 650

 

[xschris]

The needles will work in the 400 ( they are close to the 77-79 xs400 5Z-1 needles) but the 336-yo jet will not. I tried them in them in my 80 and could not get them to tune right for the 400. They are metered for a 650 that runs a much less rpm.

 

[salisride]

you still got your set ? i just wanna give it a try and considering how ppl are always saying bikes are differnt and worse case scenerio i install them on my 650 carbs

 

[xschris]

Nope. I sold them with my xs650 two years ago. I would use a set of 77-79 5Z-1 needles in your 400 as they are adjustable and (richer) than the 80-82 sets.

 

[salisride]

are the 5ix11 richer then those ?

 

[xschris]

When I compared them together they looked just about the same

 

[salisride]

alriight well ill try just the needles for now see how that help that mid range rpm

 

[salisride]

hey by any chance do you know what could be causing a pop everyonce ina while if i blip the throttle a couple of times its like an off idle stutter

 

[xschris]

Have you synced the carbs with a gauge? Also could be to lean or rich in the pilot circuit.