Dime City Cylce Jets

[MechNewb]

Im looking to buy a few different jet sizes for tuning, and wanted to know if anyone can confirm if the Mikuni jets DCC sells are compatible with the Mikuni BS34 carbs? Its the ones on the bottom of this page with the white jet guide as the picture:

http://www.dimecitycycles.com/cafe-...intake/yamaha-xs400-caferacer-carburetors?p=2


I did talk to DCC directly and they couldnt confirm as they have no experience with the BS34 carbs. They look like the correct "Large round" type and the pilots look the same but I figured I would ask.

Im already buying some stuff from DCC so figured Id rather save on shipping and get them from there instead of have to order from a couple places.

Thanks for the help!

 

[danisawesome]

Unfortunately it looks as if all of those jets listed are for the Mikuni VM carb and not our BS. Best bet is to order from MikesXS!

 

[MechNewb]

Yeah, most on that page are for the VM.
Im talking about these ones. It lists them for the Yamaha XS400 but not the BS34 carbs specifically and DCC wasnt much help.

http://www.dimecitycycles.com/vinta...rts-mikuni-vm-hs-tm-main-jet-130-004-192.html

and these ones.
http://www.dimecitycycles.com/vinta...r-parts-mikuni-vm-pilot-jet-42-5-004-733.html

Ill give them a shot and report back here.

 

[danisawesome]

Well good luck then! Hopefully they will work out. By the looks of the bleed holes, the pilots look to be the VM and aren't interchangeable with ours.

 

[MechNewb]

Damn. You're right. I think I'll play it safe and just order from Mikes. Thanks for the help!