So I am getting ready to finish up this past winters project, turning my xj400 into a cafe i've run into a wiring hiccup. i have a LED rear tail light/blinker set up that i just wired up and it worked first try ( flashers blink fast tho) but its something. i did not increase resistance or anything, i wanted to get everything hooked up to c what happens. Well after wiring that up my stock front flashers just stay lit when i hit the signals ( i knew something was going to happen, just didnt know what).
So im thinking maybe just switching the front flashers to LED ones and maybe that will work. Or following the flasher relay guide on here although i am no wiring expert
Thoughts?
Maybe replace the fronts with something like this http://www.bikebandit.com/bikemaster-arrow-head-l-e-d-turn-signals?m=138211
So im thinking maybe just switching the front flashers to LED ones and maybe that will work. Or following the flasher relay guide on here although i am no wiring expert
Thoughts?
Maybe replace the fronts with something like this http://www.bikebandit.com/bikemaster-arrow-head-l-e-d-turn-signals?m=138211