agent laraby
XS400 Enthusiast
OK 77xs360 so rebuild is ready and registered except I have the legendary xs charging failure so after testing stator, reg and rectifier etc I am replacing everything and rewiring the stator (and will be following the stator rewire forum posts from drewpy and others) . Anyway I am seeking advice from anyone who has installed one of the new solid state regs. I have a new reg/rec solid state from mikes XS it is the Ricks electric unit I believe. https://www.mikesxs.net/yamaha-xs650-solid-state-rectifier-regulator-70-79.html
its config is :
Rectifier:
3 white
1 red
reg
1 green
1 brown
1 black
So my question is has any one installed one of these to replace the separate rectifier and mechanical regulator on the 70s 360 or 400 hundred.
As some have indicated the wiring colours do not line up with stock.
My stock colours are
rectifier
3 white
1 black
1 red
Reg
1 red/black
1 brown
1 black
Anyone who has done this and what connection changes were required.
its config is :
Rectifier:
3 white
1 red
reg
1 green
1 brown
1 black
So my question is has any one installed one of these to replace the separate rectifier and mechanical regulator on the 70s 360 or 400 hundred.
As some have indicated the wiring colours do not line up with stock.
My stock colours are
rectifier
3 white
1 black
1 red
Reg
1 red/black
1 brown
1 black
Anyone who has done this and what connection changes were required.